Bad brake safety switch

   / Bad brake safety switch #1  

jimd333

New member
Joined
Sep 9, 2013
Messages
9
Location
Newtown, ct
Tractor
cub cadet 1641
Voltage is not getting to my PTO switch. I've pretty much eliminated everything else and am quite sure the brake safety switch is bad. I'm not physically able to get to the switch due a recent injury.
I should be able to wire a jumper directly to the battery to get the mower deck to run, right?
 
   / Bad brake safety switch #2  
You can connect the PTO clutch coil to the battery directly. However you will need to make sure that you have a ground connection on the clutch coil also.

Keep in mind that you will need to manually connect the clutch power after starting the engine and disconnect the clutch power before shutting off the engine. A fuse in the line is also a good idea.

Richard
 
   / Bad brake safety switch
  • Thread Starter
#3  
Thank you for your reply Richard.
I can't seem to locate the clutch coil. I'll have to find a schematic.
Wouldn't you think I could accomplish the same thing by introducing 12 volts to the PTO switch?
 
   / Bad brake safety switch #4  
In order for us to help you, we would need to know the model number of your tractor and the year of manufacture.
 

Tractor & Equipment Auctions

2014 Mack CXU613 T/A Day Cab Truck Tractor (A50323)
2014 Mack CXU613...
John Deere 652R (A50121)
John Deere 652R...
2014 International Durastar 4300 Terex BT2047 47FT 10 Ton Crane Truck (A50323)
2014 International...
Unused 2025 CFG Industrial MX50R Mini Excavator (A50322)
Unused 2025 CFG...
Satoh S-650G Tractor (AS IS) (A50774)
Satoh S-650G...
2012 INTERNATIONAL DURASTAR 4400 4X2 SERVICE TRUCK (A51406)
2012 INTERNATIONAL...
 
Top