Bad brake safety switch

   / Bad brake safety switch #1  

jimd333

New member
Joined
Sep 9, 2013
Messages
9
Location
Newtown, ct
Tractor
cub cadet 1641
Voltage is not getting to my PTO switch. I've pretty much eliminated everything else and am quite sure the brake safety switch is bad. I'm not physically able to get to the switch due a recent injury.
I should be able to wire a jumper directly to the battery to get the mower deck to run, right?
 
   / Bad brake safety switch #2  
You can connect the PTO clutch coil to the battery directly. However you will need to make sure that you have a ground connection on the clutch coil also.

Keep in mind that you will need to manually connect the clutch power after starting the engine and disconnect the clutch power before shutting off the engine. A fuse in the line is also a good idea.

Richard
 
   / Bad brake safety switch
  • Thread Starter
#3  
Thank you for your reply Richard.
I can't seem to locate the clutch coil. I'll have to find a schematic.
Wouldn't you think I could accomplish the same thing by introducing 12 volts to the PTO switch?
 
   / Bad brake safety switch #4  
In order for us to help you, we would need to know the model number of your tractor and the year of manufacture.
 

Tractor & Equipment Auctions

IF YOU BID ON AN ITEM YOU MUST PAY FOR IT!! NO BACKING OUT AFTER IT IS SOLD!! (A50774)
IF YOU BID ON AN...
2012 STEPHENS 220BBL CRUDE OIL TRAILER (A50854)
2012 STEPHENS...
2004 STERLING LT9500 SERIES MIXER TRUCK (A50854)
2004 STERLING...
2014 FORD F-350 SUPER DUTY CREW CAB FLATBED TRUCK (A51243)
2014 FORD F-350...
2004 Chevrolet C5500 Shuttle Bus (A50323)
2004 Chevrolet...
2021 Delta Redirective Crash Cushion 75000 (A49461)
2021 Delta...
 
Top