Has anyone devised a method for storing their backhoe on some kind of dolly system where it can be wheeled around easily? Since I have the BH75 hoe, I'm now looking to make the most of my floor space in my garage as it is getting quite crowded. I'm try to store the tractor/loader/RFM/Hoe/Honda Foreman all on one side of a 24ft deep 2 car garage. As it stands now, the ATV is going to have to be stored outside over the summer. I'm sure some one has come up with something.
Backhoe Backhoe storage?
- Thread starter MDM
- Start date
- Views: 3311
Jabroni
Silver Member
Tom_H
Veteran Member
The link above will take you to a thread re. one dolly.
This same question was just asked. It is always a good thing to search archives. Our archives have some problems from a change of servers several years ago. I used some alternate approaches for getting into archives and copied all the pics from every kubota bh dolly project and consolidated all the pics into one thread less than two weeks ago. The following thread does not give you the narrative that exists in all the original thrrrreads, however you do get all the pics in one place. The pics begin on the 2ng page @ post #13.
I am currently building a dolly for my Woods BH6000 and will post them on that same thread. If you finish a bh dolly, would you also please post pics in that same thread? This way, we can keep all the info in one place for those who inquire in the future. Thanks.
http://www.tractorbynet.com/forums/kubota-owning-operating/119059-bx23-fel-bh-dollies.html
This same question was just asked. It is always a good thing to search archives. Our archives have some problems from a change of servers several years ago. I used some alternate approaches for getting into archives and copied all the pics from every kubota bh dolly project and consolidated all the pics into one thread less than two weeks ago. The following thread does not give you the narrative that exists in all the original thrrrreads, however you do get all the pics in one place. The pics begin on the 2ng page @ post #13.
I am currently building a dolly for my Woods BH6000 and will post them on that same thread. If you finish a bh dolly, would you also please post pics in that same thread? This way, we can keep all the info in one place for those who inquire in the future. Thanks.
http://www.tractorbynet.com/forums/kubota-owning-operating/119059-bx23-fel-bh-dollies.html
wushaw
Elite Member
Here is the one I built for my BH75. It was my first welding project.
http://www.tractorbynet.com/forums/build-yourself/66131-bh75-bh-stand.html
http://www.tractorbynet.com/forums/build-yourself/66131-bh75-bh-stand.html