backhoe repair

   / backhoe repair #1  

jamievt

New member
Joined
Jun 21, 2022
Messages
3
Tractor
mf1440
What's the proper fix for this? The hole is worn and everything wobbles. I cut away what I could. Its a massey backhoe.

Is it a "bushing with flange" that i need to put in there?

Where do I fnd what I need? Looks like the pin is 1-1/4 inch.
 

Attachments

  • 290827530_857362228557257_4703463553940149857_n.jpg
    290827530_857362228557257_4703463553940149857_n.jpg
    1.2 MB · Views: 134
   / backhoe repair #2  
Could be done with a shouldered bushing. But if u want it done the “right” way, I would weld a bushing in to eliminate maximum pin slop.
 
   / backhoe repair #3  
Added new bushings to my friends skid steer a few years ago. Pretty simple if u can weld
 
   / backhoe repair #4  
You can buy "bushing stock" by the foot online. I would cut it out and weld a new bushing on. Along with putting a new pin in there.
 

Tractor & Equipment Auctions

2022 KUBOTA SVL75-2 SKID STEER (A51242)
2022 KUBOTA...
2016 Chrysler Town and Country (A50515)
2016 Chrysler Town...
1996 PETERBILT 357 35 TON WRECKER (A50505)
1996 PETERBILT 357...
2016 CHEVROLET SILVERADO 2500 HD CREW CAB TRUCK (A51243)
2016 CHEVROLET...
DOOSAN DL250 LOADER (A51242)
DOOSAN DL250...
2016 E35 Bobcat Mini Excavator (A50322)
2016 E35 Bobcat...
 
Top