kolob5
New member
I've got a chance to pivk up a John Deere 48 backhoe for a good price. Could it be adapted to mount on my Branson 3820? Thanks in advance.
Backhoe Backhoe purchase
- Thread starter kolob5
- Start date
- Views: 1893
Stimw
Elite Member
If you know what you are doing you should be able to modify it to fit.
I have a Branson 3510 and I bought a new leftover Jinma Hoe on ebay for $2200. I had to modify the subframe to fit my tractor and add rear hydraulics. I do have a fabrication/Welding shop so it wasn't very hard for me.
I did have problems with the Chinese hose fittings and had to make some adapters but I powered through it.
I have a Branson 3510 and I bought a new leftover Jinma Hoe on ebay for $2200. I had to modify the subframe to fit my tractor and add rear hydraulics. I do have a fabrication/Welding shop so it wasn't very hard for me.
I did have problems with the Chinese hose fittings and had to make some adapters but I powered through it.
wallace
Veteran Member, Approved Advertiser
I am 99% sure that the deere backhoe is made by Ameriequip which is the same maker of the Branson backhoe. You can more than likely pick up the right sub frame from a Branson dealer and it should bolt right up!:thumbsup:
As far as I know that Deere 48 is in fact an Amerequip 8600, which is what I have on a C42 (Large Frame).
It should fit right on if you can get a sub frame - getting a sub frame could be a problem.
EDIT;
Sorry Wallace, didn't see your post before I posted.
Chances are we're either both right or both wrong, but at least we AGREE (-:
;END EDIT
PS If anyone comes across a 12 inch or so bucket for one of these - for CHEEP ! Please contact me (-:
Last edited:
