backblade size 6 or 7?

   / backblade size 6 or 7? #11  
Yeah Mark,

I have an 8 ft 100 HP blade on my tractor and have to watch it carefully and run it slow. Catch a big rock and something has to give. I usually run in 1st gear and at idle to get as low a speed as possible. I am pulling it with 68 HP and the 3 point linkage and stabilizers are beefy on the M6800, but Kubota only rates it for a 7 ft blade. When digging ditches, the forces are extremely high on a blade, but it does a wonderful job. Just like all things, be careful.
 
   / backblade size 6 or 7?
  • Thread Starter
#12  
thanx again for the "real life experiences" I plan on getting a 7 for snow but will not use it to dig any ditchs in hard packed dirt. (I have a 5ft box blade w/rippers that I would use for that) Sounds like I should be fine working in any loose material which is what I plan on. Now to find the right one........
 
 

Tractor & Equipment Auctions

2016 Chevrolet Impala Limited Sedan (A55853)
2016 Chevrolet...
UNUSED FUTURE SB45 HYD SILENT BREAKER (A52706)
UNUSED FUTURE SB45...
PENDING SELLER CONFIRMATION  READ BEFORE BIDDING (A55315)
PENDING SELLER...
2022 Carry-On 5'x8' Trailer (A53316)
2022 Carry-On...
1998 CATERPILLAR 953C CRAWLER LOADER (A52707)
1998 CATERPILLAR...
2001 Ford Crown Victoria Passenger Car, VIN # 2FAFP71W41X143155 (A54865)
2001 Ford Crown...
 
Top