Chilly807
Elite Member
Usually takes about 30 degrees of angle before mine works well, a lot depends on the air temp and the type of snow.
Sean
Sean
Back blade build started
- Thread starter camshawn
- Start date
- Views: 8370
Paint will help as well as more angle, I just selected a hole without really looking and bolted it down. I still have to get some 3/4 round stock for the pins.
The snow here this afternoon is more like slush, just above freezing since mid morning. It is now moved off the driveway.
Cam
The snow here this afternoon is more like slush, just above freezing since mid morning. It is now moved off the driveway.
Cam
Re: Back blade build started.. Finished
Final pictures of my back blade. I still need to get the hydraulic hoses for the angle cylinder.
I have had a lot of fun building this project. Thanks to all who have contributed to this effort.
I will try to get a better paint match when I buy a new gallon of paint.
Cam
Final pictures of my back blade. I still need to get the hydraulic hoses for the angle cylinder.
I have had a lot of fun building this project. Thanks to all who have contributed to this effort.
I will try to get a better paint match when I buy a new gallon of paint.
Cam
JKR
Silver Member
What a great job you did on that blade.
jodebg
Platinum Member
Nice job!
Here are some similar links:
