B7500HSD with FEL

   / B7500HSD with FEL #1  

Spud

Member
Joined
Sep 24, 2001
Messages
29
Location
Moncton, New Brunswick, Canada
Tractor
2001 Kubota B7500HST
Hi

Anyone know what the length of a B7500HSD & LA302 Fel would be? I need to figure this out before I have a trailor made to haul the B7500HSD and Fel. Guess I should most likely add some length for a rototiller or backhoe also.

Spud
 
   / B7500HSD with FEL #2  
Spud
Check out this thread on Trailer spec's. There is a lot of information on how to spec a trailer. My guess would be 16 to 18' by maximum width between fenders 7'6".


18-30594-ronssig2.gif
 
   / B7500HSD with FEL #3  
I use a common style dual-axle trailer with a 16' x 6.5' floor. My B2150HSD w/FEL should be only slightly longer than a B7500.

The tractor/FEL/60" Landpride finish mower goes from the front rail to the rear edge.
The tractor/FEL/rotary mower hangs off the trailer by the length of the rotary mower's tail wheel.

I have had no problems with the 6.5' width; however, I did refuse to buy a new 6' wide finish rear-discharge mower because it was 1" too wide for my trailer (this allowed me to jump on a great deal on the used 60" side discharge Landpride mower).

Therefore...

Length: Get at least 16 feet.

Width: 6.5 feet should work for the rototiller and back-hoe. A 6' landscape rake or a 6' scraper blade should fit with narrow clearance. You probably shouldn't be using 6' mowers on the B7500 so that shouldn't be a problem.

Kelvin
 

Tractor & Equipment Auctions

2019 Ford F-550 Bucket Truck (A51039)
2019 Ford F-550...
2011 FORD F-250 (INOPERABLE) (A50854)
2011 FORD F-250...
Komatsu PC490LC-11 Hydraulic Excavator (A49346)
Komatsu PC490LC-11...
Polecat swift 206R (A50322)
Polecat swift 206R...
2007 INTERNATIONAL 4200 SBA 4X2 DUMP TRUCK (A50459)
2007 INTERNATIONAL...
John Deere 4520 Tractor (A50514)
John Deere 4520...
 
Top