3-Point Hitch B3030 3 pt not lifting as much as hoped...........

   / B3030 3 pt not lifting as much as hoped...........
  • Thread Starter
#11  
LD1 said:
What hole is the toplink in on the tractor side?

And how does the pallet lift? Does it lift level? or does it tilt forward a little?

When at ground level it is level but as it lifts the fork ends (away from tractor) begin to be higher so load is angled back at/ tipping toward the tractor
 
   / B3030 3 pt not lifting as much as hoped........... #12  
When at ground level it is level but as it lifts the fork ends (away from tractor) begin to be higher so load is angled back at/ tipping toward the tractor

If you set up the 3PH so that it "tilts" the least about or remains level, will give you the most lift capacity.

As I said, Top hole for the TL on the tractor, and lengthen it as much as you can.
 
   / B3030 3 pt not lifting as much as hoped........... #13  
Group,
I have a B3030 and am looking at a 800 lb cultipacker....it appears the B3030 will be able to lift it withouta problem..correct?
 
   / B3030 3 pt not lifting as much as hoped........... #14  
My rear-mounted snow blower weights approximately 400lbs and my B3030 hardly breaks a sweat picking it up.
 

Attachments

  • Kubota B3030 w Snowblower Running.jpg
    Kubota B3030 w Snowblower Running.jpg
    70.5 KB · Views: 174
   / B3030 3 pt not lifting as much as hoped........... #15  
thanks, I have a 58 inch rear tiller and I think its weight is a little over 400. I just want to make sure I can lift 800 before I make a purchase.
 
   / B3030 3 pt not lifting as much as hoped........... #16  
Bigtwin said:
thanks, I have a 58 inch rear tiller and I think its weight is a little over 400. I just want to make sure I can lift 800 before I make a purchase.

My BX would lift that much. You should not have a problem.
 
   / B3030 3 pt not lifting as much as hoped........... #17  
The 3 pt. lift capacity of the B3030HSD shows to be 2139 lbs.at the lift point and 1676 lbs. 24" behind the lift point. You will be fine with 800 lbs.
 

Tractor & Equipment Auctions

2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
4 1/2 150G DRILL STEM 288 JOINTS (A50854)
4 1/2 150G DRILL...
2017 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER (A51222)
2017 FREIGHTLINER...
John Deere 772B Articulated Motor Grader (A49461)
John Deere 772B...
2015 CHEVROLET CAPRICE POLICE CAR (A51222)
2015 CHEVROLET...
2015 FREIGHTLINER M2 DAY CAB (A51222)
2015 FREIGHTLINER...
 
Top