b2910 hydo neutral switch?

[nhman]

My b2910 would not start last weekend. Had power and all safety switches were good. Talked to the dealer and was told it was most likely the hydro neutral safety switch. As it turns out there's a tabf on the linkage that engages the safety switch to set it to neutral. Luckily, I have a very handy neighbor who owns 3 kubotas in a land scaping business and he was able to easily fix it. I never did see what he reset after he explained it to me and still can't picture it. I have the parts manual and workshop manual and still cannot find a picture of what he reset. Can anyone send a picture our of their books if they know what this 'tab' is?

 

[ronjhall]

I have the parts manual and workshop manual and still cannot find a picture of what he reset. Can anyone send a picture our of their books if they know what this 'tab' is?

In my WSM the switch shows up 2 times. In section 3-S20 and 9-S10. They both show the switch. The parts list shows it under F10702 page 109. I went out to tractor and checked for the switch. I was not able to find it. Appears to be behind right rear tire. Glad you neighbor was able to fix yours without sending to dealer.

 

[nhman]

Thanks for the reply; it took me a few days to get back on line. Found the pages.

To get to it, you have to remove the plastic cover below the seat, but its still hard to get at.