Attachments for 1782 Super cub
- Thread starter farmerett
- Start date
- Views: 3753
OhioGuy
Platinum Member
- Joined
- Jul 23, 2003
- Messages
- 595
- Location
- Northeast Ohio
- Tractor
- Ford 1220, Case 245, Cub SZ60, Cub 2284
Re: Attachments for 1782 Super cub
I see them on Ebay occasionally, they go for around $500. Also, check with your local Cub dealers, I don't know if a new one can be ordered but they often have trade in implements locally. I believe the Supers use a Model 450 blower.
Good luck,
Curt
I see them on Ebay occasionally, they go for around $500. Also, check with your local Cub dealers, I don't know if a new one can be ordered but they often have trade in implements locally. I believe the Supers use a Model 450 blower.
Good luck,
Curt
jimdiesel1
Bronze Member
- Joined
- Jun 27, 2005
- Messages
- 64
Re: Attachments for 1782 Super cub
Depending on your serial number,you will use the 190-450 for earlier tractors,the 190-451 (or -551) for the newer units. PTO pulley diameter is different and one blower has a 19-1 ratio{impeller to auger} while the other is 26-1. Ask a dealer based on your S.N. which one you need. If you pick the wrong one it does fit but performance is poor.
Depending on your serial number,you will use the 190-450 for earlier tractors,the 190-451 (or -551) for the newer units. PTO pulley diameter is different and one blower has a 19-1 ratio{impeller to auger} while the other is 26-1. Ask a dealer based on your S.N. which one you need. If you pick the wrong one it does fit but performance is poor.