Anyone running a skid loader upside down wood splitter on your front end loader?

   / Anyone running a skid loader upside down wood splitter on your front end loader? #1  

NonTypicalCPA

Silver Member
Joined
Jul 26, 2007
Messages
139
Location
SW Michigan
Tractor
Kubota L3940
I have some big rounds I have to deal with from time to time, and I'm getting tired of fighting them into position on my vertical splitter. I know they make upside down splitters for skid steers. I have a third function valve and remotes on my FEL for my grapple already. Can I use these and run an upside down splitter from them? My tractor is a Kubota L3940. Not sure what the hydraulic flow or pressure is off the top of my head.
 
   / Anyone running a skid loader upside down wood splitter on your front end loader? #2  
Around 10gpm. It'll be slow especially if it's a 5" cylinder. Some 3rd function valves are not made for continuous use and the manufacturer warns they'll overheat and seize.
 
   / Anyone running a skid loader upside down wood splitter on your front end loader? #3  
You better get used to watching oil based paint dry in the winter time.
 
   / Anyone running a skid loader upside down wood splitter on your front end loader?
  • Thread Starter
#4  
How about fabbing up a self contained splitter where you start itエs motor then plumb hydraulic lines to control the splitters lever?
 
   / Anyone running a skid loader upside down wood splitter on your front end loader? #5  
How about fabbing up a self contained splitter where you start itï½´s motor then plumb hydraulic lines to control the splitters lever?

It would be more practical to use a pto pump unless you already have a pump and motor,but you’re on the right track.
 
   / Anyone running a skid loader upside down wood splitter on your front end loader?
  • Thread Starter
#6  
I already have a splitter and a buddy who痴 an excellent welder. He actually has a splitter for his skid steer. I値l run my idea past him.
 
   / Anyone running a skid loader upside down wood splitter on your front end loader? #7  
I don't know how well it would work on a tractor but, this linked video has me wanting a sideways splitter.
I'm always perplexed when people using a splitter drop their splits onto the ground rather than some type of conveyance like a truck bed or wheelbarrow. It seems like it would save a step.
Massive Oak Rounds to Split - YouTube
 
   / Anyone running a skid loader upside down wood splitter on your front end loader? #8  
These splitters seem nice for breaking down big pieces and not very practical for splitting regular firewood.
 
 

Tractor & Equipment Auctions

RIDE AND DRIVE INFO (A50774)
RIDE AND DRIVE...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
2014 FREIGHTLINER CASCADIA (A50854)
2014 FREIGHTLINER...
2014 KALMAR 4X2 YARD DOG (A50854)
2014 KALMAR 4X2...
2021 Ver-Mac PCMS-3812 Solar S/A Towable Trailer Message Board (A49461)
2021 Ver-Mac...
GENERATOR HOUSE POWERED BY TWIN (60 SERIES)  DETROIT 14.0L ENGINES (A50854)
GENERATOR HOUSE...
 
Top