Rear Finish Mower Anyone knows who makes this mower

   / Anyone knows who makes this mower #1  

gooffer69

Member
Joined
May 17, 2012
Messages
37
Location
Kingston, NY
Tractor
TZ18DA, TC45DA
Just picked it up today works nice and at $500 delivered I can't argue with its usefulness
 

Attachments

  • image.jpeg
    image.jpeg
    2.5 MB · Views: 326
   / Anyone knows who makes this mower #2  
woods C80
 

Attachments

  • 4833659_4_l.jpg
    4833659_4_l.jpg
    86.2 KB · Views: 214
   / Anyone knows who makes this mower #3  
I don't know anything about the C80 part, but the drive shaft guard looks like the one on my Woods Cadet.
 
   / Anyone knows who makes this mower #5  
May I ask how wide. If it's 6ft or smaller around here they robbed you badly. I know I know different parts of the country
 
Last edited:
   / Anyone knows who makes this mower #6  
I don't recall ever seeing anything like that. It appears to be a rear discharge finish mower pull type??? I don't see any adjustment on the front hitch?? I understand the hyd cyl will lift the rear. So the front cannot be lifted?? Won't it scalp really bad??

If you look at the pic D7E posted you can clearly see the adjusters for front and rear cutting height.
 
   / Anyone knows who makes this mower #7  
I don't recall ever seeing anything like that. It appears to be a rear discharge finish mower pull type??? I don't see any adjustment on the front hitch?? I understand the hyd cyl will lift the rear. So the front cannot be lifted?? Won't it scalp really bad??

If you look at the pic D7E posted you can clearly see the adjusters for front and rear cutting height.

Can't the front be adjusted with the 3pt hitch height?
 
   / Anyone knows who makes this mower #8  
The mower in the OP appears to be towed (via the drawbar).

Steve
 
   / Anyone knows who makes this mower #9  
Can't the front be adjusted with the 3pt hitch height?

Not when it's hitched to the fixed drawbar.

If you did hitch to the 3pt you better be diligent or you'll have the 3pt drawbar into the PTO shaft!!!! :eek:
 
   / Anyone knows who makes this mower #10  
Looking at the hitch, I would guess that it adjusts up and down manually so you set the front height by hand and then the back height with the cylinder. See the bar that goes down and in the middle of the front hitch?
Edit, here are the pictures I was looking at:
7: Woods C80 Pull Type Rotary Mower for Tractors : Lot 7
4833659_2_l.jpg 4833659_1_l.jpg


Aaron Z
 
 

Tractor & Equipment Auctions

2020 JOHN DEERE 317G SKID STEER (A52707)
2020 JOHN DEERE...
2007 Freightliner B2 School Bus (A55852)
2007 Freightliner...
2016 Ford Escape SE SUV (A55853)
2016 Ford Escape...
2010 Ford F550 Bucket Truck with Altec AT37G Boom (A57024)
2010 Ford F550...
Krause Dominator 4850-18ft (A57024)
Krause Dominator...
2014 Glasstream 360 SCX Twin 400R Mercury's with Triple Axle Aluminum Trailer (A55853)
2014 Glasstream...
 
Top