I set mine real close to 20HP and it didn't slip at all with a 45HP pto tractor. I'd suggest loosening it until it just slips and then tighten it back up a half turn or so.
Anyone have a MechMaxx 3-pt stump grinder?
- Thread starter deezler
- Start date
- Views: 96589
-
- Tags
- stump stump grinder
I set mine real close to 20HP and it didn't slip at all with a 45HP pto tractor. I'd suggest loosening it until it just slips and then tighten it back up a half turn or so.
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,306
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
I emailed them about their "book" settings. I explained they were highly inaccurate and not easy to duplicate due to many factors. They responded that they needed to remove them from the book and that they were incorrect. They recommended setting it loosely and tightening it until it normally would not slip.
