Any ideas about this crown nut?

   / Any ideas about this crown nut? #1  

Luke'sScreenName

Elite Member
Joined
Mar 1, 2015
Messages
3,710
Location
Lakes Region, NH
Tractor
Kubota MX4800 with BH-90X hoe; Hustler FastTrack 48; B3300SU (sold); 1969 Case 680B CK (sold)
I found this small sheared-off crown nut in my driveway today. Any ideas on what it came from?

This is an area where multiple machines travel including:
Kubota tractor,
-Hustler ztr,
-Deere branded push mower,
-all my tractor Implements,
-multiple automobiles,
-kids stuff like bikes and metal tonka toys I scrounge from the dump.
-multiple small engines things like chainsaws, trimmers, etc.

If it needed a crown nut it's probably important but I don't know where to start. Help!

IMG_20170813_125710077-2254x4007.jpg

IMG_20170813_125700059-2254x4007.jpg
 
   / Any ideas about this crown nut? #2  
Check the steering linkages and suspension on the cars and tractors would be my first guess.
 
   / Any ideas about this crown nut? #3  
I found this small sheared-off crown nut in my driveway today. Any ideas on what it came from?

This is an area where multiple machines travel including:
Kubota tractor,
-Hustler ztr,
-Deere branded push mower,
-all my tractor Implements,
-multiple automobiles,
-kids stuff like bikes and metal tonka toys I scrounge from the dump.
-multiple small engines things like chainsaws, trimmers, etc.

If it needed a crown nut it's probably important but I don't know where to start. Help!

View attachment 518415

View attachment 518416

Looks like a crown nut off a tie rod end. Seeing the bent nail or bent welding rod keeper I'd say (hope) its off farm machinery. No doubt the tie rod is going to come out now so check all the steering tie rods closely.

Maybe off a sickle bar mower as well.
 
   / Any ideas about this crown nut?
  • Thread Starter
#4  
Ok, will do. :thumbsup:
 
   / Any ideas about this crown nut?
  • Thread Starter
#5  
Nope, not off a tie rod. FWIW those were a fair amount bigger on all my machines.
 
   / Any ideas about this crown nut? #6  
Nope, not off a tie rod. FWIW those were a fair amount bigger on all my machines.
They will be smaller on cars than big machines i think. Time to jack up the grocery getters
 
   / Any ideas about this crown nut?
  • Thread Starter
#7  
Everything checked out except the wife's minivan! And she has the kids! Ive been trying to reach her on cell. She bad about answering. At least that's what I'm telling myself...

Edit I talked to her. I'll walk her through checking before she drives anywhere.
 
   / Any ideas about this crown nut?
  • Thread Starter
#8  
That wasn't it. Any other ideas?
 
   / Any ideas about this crown nut? #9  
Maybe double check the wife's van when she gets home just to be sure. Ive seen them on odd stuff too like shift linkages but honestly it may be really hard to find where that came from.

Is your driveway gravel? It may have been in the gravel the entire time. Could be from a visitors car... could be something weird up on machine you own. Do you have an atv? They use them too. You mentioned implements....

Basically you found the needle and now you have to locate which haystack is short a needle.
 
   / Any ideas about this crown nut? #10  
Check the linkage on a zero-turn controls. The ones I've seen have had crown nuts around that size to attach the linkage to a lever.

Aaron Z
 

Tractor & Equipment Auctions

Yale GLC050LXNVAE087 5,000lbs Propane Cushion Tire Forklift (A51691)
Yale...
FAKE (A52472)
FAKE (A52472)
2016 Chevrolet Sonic LS Hatchback (A50324)
2016 Chevrolet...
2025 12V Diesel Pump and Hose (A50324)
2025 12V Diesel...
2017 John Deere 652R (A50121)
2017 John Deere...
(30) 24-A Macro Bins (A50121)
(30) 24-A Macro...
 
Top