Buying Advice any advice

[Bigbuck6202]

I am currently looking at two different models a 2210 and a 2310. I cannot decide which. I will not be using this tractor for much except grass cutting about 10 acres. the finding a distributor in Louisiana is like pulling teeth with a pair of pliers. I have found a few that are helful out of La. They are Hoye in Texas( I would have to buy sight unseen but he will deliver for a great price) Cas tractor in Georgia( about 600 miles would have to go get (gas $3.00. gal) and Fredericks In Alabama (about 560 miles, gas same price). Remembering a limited budget. and that I am not mechanically inclined .here are the quotes if anyone can beat let me know. CAS 2210 w /disk ,cutter and 16' tandem trailer Fredericks 2210 w/rops ,tiller ,cutter,trailer,$5959. Hoye 2310w/ tiller,cutter 5500 add rops $6100 (delivered), Fredericks 2310w/ rops,cutter tiller trailer $7300. It seems the more research I am doing the more I get confused.

 

[LMTC]

Is price all that matters to you? If it is, the decision is easy. If it isn't, then what does matter? Quality? Dealer integrity? Dealer responsiveness to problems? If these things matter, how many references from each potential seller have you communicated with? If you would come to what is essentially an anonymous forum and ask opinions, why not ask each seller for references (especially some several years old--most people are happy at first)?

Good luck. And get references. Did I mention to ask for references?

You may also want to peek at this old thread.

HERE

 

[passgas55]

Where are you at in La? I purchased a 2210 from LMTC about 2 months ago and so far I am well pleased with my purchase. If you are in the Loranger area give me a holler and you can check out my tractor. I will let you cut my grass too .

 

[BruceR]

Take passga55 upon his offer and try before you buy. I'm partial to the 2cyl. models, so the 2210 would be my choice. Less moving parts also, if you mechanicaly challenged. If you are only cutting grass, why not drop the tiller and disk to cover the gas ?

Bruce

 

[Travis_R]

Have you contacted Manning Enterprises in Franklinton, LA? Contact me for more information. I just bought a YM2500 and a new 5' Sitrex finishing mower from him a couple months(?) ago.

Also, have you contacted RCO Tractor. I also bought one from them some months ago. They are good people to deal with.

Travis R

 

[LMTC]

You might want to search the posts of any individual making recommendations to you. You know, to see if maybe they have said contradictory things in other posts.

And if it is at all possible for you, take passgass55 up on his offer, primarily to see if a 2210 fits you and if you like it. Even a day's time and $50 gas is worth it to help decide.

 

[BruceR]

Pretty sound advice

Bruce

 

[Travis_R]

You might want to search the posts of any individual making recommendations to you. You know, to see if maybe they have said contradictory things in other posts.

And if it is at all possible for you, take passgass55 up on his offer, primarily to see if a 2210 fits you and if you like it. Even a day's time and $50 gas is worth it to help decide.

Yes, that individual would be me. And I did sell the YM2000 that I bought from RCO Tractor. I had a overheating problem that was very easily taken care of (after a lot of frustration). RCO paid for everything, but I did the labor. They would have done it but it would have been too much trouble for them and me to get the tractor back to Texas and Louisiana. It wasn't nothing to take the radiator off and put it back on.

For what its worth, I didn't buy my YM2500 from them because they didn't have one ready at the time and also because I found that the shipping was a little high.

I have heard many good things about the "UTDA Certified" Yanmar tractors that come from Fredericks Equipment. Thats one reason that I bought one. Didn't know that I was gonna have all this trouble.

Well, my hydraulic lift has not been right since I bought it. It leaks down fast when the tractor's engine is killed. I had to flush the transmission/hydraulics 3 TIMES (got expensive) to get all the (very) filthy fluid out. I hauled it bak and forth to the dealer for 3 WEEKENDS IN A ROW AND IT STILL DIDN'T GET FIXED! I ended up just giving up on it.

What I'm saying is, buy from a good dealer. I can say that in my experience, I was happier with the 'Vietnam' reconditioned tractor's quality than I am with the UTDA's (if I may) tractor's quality, but would buy from both "reconditioners" again. Thats the truth.

From the 2 different sources I have bought from/ dealt with, I have to say I would have went with RCO Tractor again- Excellent people to do business with that has a good product. And now, If I'm not mistaken I think that they are even selling a few UTDA Certified tractors now.

Travis R

 

[Tractors4u]

From the 2 different sources I have bought from/ dealt with, I have to say I would have went with RCO Tractor again- Excellent people to do business with that has a good product. And now, If I'm not mistaken I think that they are even selling a few UTDA Certified tractors now.

Travis R

RCO has at least 1 UTDA tractor. They are not a UTDA dealer and could not be held to UTDA policy.

As LMTC said, check a dealers references. Also check past posts by members of this site for credibility.

For a list of UTDA dealers, click here;

UTDA Membership List

 

[kenmac]

Well Travis, I bought from Tom directly & while I had a couple front seals that I replaced I have had no real problems with my tractor . Tom ,Danny & Paul were very helpful when I replaced those parts. My tach. went bad & they sent me a brand new tach. I have been very happy / pleased the way I was treaded by Tom & his staff.