Another question. How do I get this apart?

[dmcb]

JD 410C bucket. I need to get the pin in the picture apart. I beat on it but don't want to break it. Maybe something I need to know like a left hand thread.
Or do I just beat into submission?
If the pictures are not clear, both ends have the T bar and the pin turns freely. So somehow it comes apart.

 

[Peter 315]

I think its a home made pin and keeper, might have to cut it off

 

[mcfarmall]

Its a hydraulic pin. Cycle the valve handle and she'll come right out.

 

[dmcb]

Thanks for your helpful suggestion.

 

[handtools]

[ might have to cut it off ]

I agree, looks like you need to cut one of the "T's" off and if it's free should come right out.

 

[dmcb]

It would come right out if I cut it. If that's what it takes.

 

[Peter 315]

Just cut the square stock off with a grinder or torch

 

[Peter 315]

How did you make out with the machine