dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Put a recognizable coin next to it to give some perspective.
Ammunition
- Thread starter paulharvey
- Start date
- Views: 177298
k0ua
Epic Contributor
k0ua
Epic Contributor
It will be .429 to .430 in diameter.. (as all .44 magnum bullets are)
As .44 magnum bullets go, it s a pretty heavy one as the standard loads run from 180 grains on the light side to 240 grains being a common bullet weight. This lead bullet has a large meplat and is likely hard cast. it will not expand, but it is not designed to do so. It is a bone smasher and deep penetrator. Just what you would want for dangerous things with fangs. not what you would want for a whitetail. Of course with the heavy weight the muzzle velocity would be much lower.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
I know... but it looks much more impressive with perspective... just sayin' Probably should have kept my mouth... I mean fingers quiet.It will be .429 to .430 in diameter.. (as all .44 magnum bullets are)
jack707
Veteran Member
You would think the 325 gr I posted
Would be slow I use to shoot that tru a crono. And as I remember the we're in the low 1000th . Also I shoot that bullett through a blk.hawk 44 6 inch Barrell at a metal gong at a 100 yards away with iron sights on sand bag and rang the gong. I use to reload with the 240gr no more .
Would be slow I use to shoot that tru a crono. And as I remember the we're in the low 1000th . Also I shoot that bullett through a blk.hawk 44 6 inch Barrell at a metal gong at a 100 yards away with iron sights on sand bag and rang the gong. I use to reload with the 240gr no more .
hutchman
Veteran Member
- Joined
- Mar 11, 2014
- Messages
- 1,447
- Location
- Central Virginia
- Tractor
- LS R3039, Deere SST16, Ariens APEX 60", Polaris Ranger 900 XP EPS
Elmer Keith would be proud!
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
it's a .44 size is finite and known.
jack707
Veteran Member
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Gas checked as well.
I have a 200gr 35 rem mold coming today for gas checks. it's a FN profile and will have a pretty good meplat as well.
I have a 200gr 35 rem mold coming today for gas checks. it's a FN profile and will have a pretty good meplat as well.
jack707
Veteran Member
I buy these on the net in Idaho .