Buying Advice Agco GT75

cooperman · Mar 8, 2016

Does anyone have any information about this tractor?

LindenBruce · Mar 8, 2016

Maybe this will help. B.

TractorData.com AGCO GT75 tractor information

cooperman · Mar 8, 2016

LindenBruce said:
Maybe this will help. B.

TractorData.com AGCO GT75 tractor information

I have already been there. I am sure somebody out there has had some hands on experience with this tractor. There is one for sale in my area; 2007, cab,700hrs,and very clean, $20,000, however it seems to shift kind of hard, kind of like you are searching for the slot. Anybody?

Sawyer Rob · Mar 8, 2016

Does it shift hard after it has sat quite a while? OR all the time?

I think one of my AGCO's has the same tranny, and when it sits quite a while, it shifts harder until it get's used a little.

I believe a little rust forms and after the shifter is used a bit, it wears away...

SR

cooperman · Mar 8, 2016

Sawyer Rob said:
Does it shift hard after it has sat quite a while? OR all the time?

I think one of my AGCO's has the same tranny, and when it sits quite a while, it shifts harder until it get's used a little.

I believe a little rust forms and after the shifter is used a bit, it wears away...

SR

I just recently went to see the tractor and yes it has been unused for quite some time. I was wondering if the clutch could be an issue, even with the low hours a clutch on the wrong foot can be a disaster.

Sawyer Rob · Mar 8, 2016

I'm betting it's the rust issue...

I'm thinking you can rule the clutch out, by trying to shift it with the motor off... IF it shifts hard then, you know it isn't the clutch.

After sitting a while, the lever just get's hard to move smoothly....

I think my "range" lever shifts harder IF it sets a time, too.

SR