6011 help

   / 6011 help #1  

aarolar

Platinum Member
Joined
Feb 20, 2016
Messages
663
Location
Augusta Ga
Tractor
Kubota MX4800
Guys I bought some 6011s to use on less than perfect joints I've got and I feel like it's running super cold any thought. This is at 120 amps electrode positive it's very cold looking and **** to start.

uploadfromtaptalk1462143956601.jpg
 
   / 6011 help #2  
What welder are you using? Some welders just don't have the voltage to run 6010, or 6011 very well.
 
   / 6011 help
  • Thread Starter
#3  
Everlast 160
 
   / 6011 help
  • Thread Starter
#4  
It did a little better on the other side I slowed down on my pauses and let it burn in more.

uploadfromtaptalk1462146145429.jpg
 
   / 6011 help #5  
That looks pretty darn good! I like Hobart's 335A 6011. It seems to stack real well for me.
 
   / 6011 help #6  
You don't say what size rods you have. I assume 1/8? Welds look pretty nice for 6011.
 
   / 6011 help
  • Thread Starter
#7  
Yes TSC 1/8 6011s
 
   / 6011 help
  • Thread Starter
#8  
Would there be any advantage to running them on the 6010 port on this machine?
 
   / 6011 help #9  
That's where they SHOULD be running. any 10/11 rod which is cellulose flux.
 

Tractor & Equipment Auctions

UNUSED AGT SA-FT HYD PALLET FORKS (A51248)
UNUSED AGT SA-FT...
Set of AG R4 Wheels and Tires (A53472)
Set of AG R4...
2016 JOHN DEERE R4038 LOT IDENTIFIER 181 (A53084)
2016 JOHN DEERE...
2018 Big Tex Tandem Equipment Trailer (A52384)
2018 Big Tex...
2022 TAKEUCHI TL12R2 SKID STEER (A51246)
2022 TAKEUCHI...
2014 International DuraStar 4300 Street Sweeper Truck (A52377)
2014 International...
 
Top