590 new holland baler

   / 590 new holland baler #1  

BUDDY2019

New member
Joined
Mar 12, 2019
Messages
3
Tractor
LANDINI VISION105
I have a 590 new Holland 1999 baler that says on the monitor that the sheer pin is broken but i have replaced that .I it does this under heavy hay load but does not show this error under light load or on idle . What is the fix here any body thank you BUDDY 2019
 
   / 590 new holland baler #2  
I have a 590 new Holland 1999 baler that says on the monitor that the sheer pin is broken but i have replaced that .I it does this under heavy hay load but does not show this error under light load or on idle . What is the fix here any body thank you BUDDY 2019
Is there a slip clutch on the pick-up
 
   / 590 new holland baler
  • Thread Starter
#3  
HI Dwayne yes it does have a slip clutch on the pick up
 
   / 590 new holland baler #4  
HI Dwayne yes it does have a slip clutch on the pick up
I've got a 849 roll baler. I had to take the clutch off of and clean it. Then polished it all up with Emory cloth because it was slipping. If your baler is telling you the pick-up pin is sheared that's where I would look. If it's the drive line I would check the pto clutch. I don't know where that particular baler has sensors but, it has to be a clutch or a sensor.
 

Tractor & Equipment Auctions

MURRAY 22" GAS PUSH MOWER (A51248)
MURRAY 22" GAS...
UNUSED RAYTREE RPRB72-72" POWER RAKE BUCKET (A51248)
UNUSED RAYTREE...
PAIR DIAMOND PLATE DBL AXLE FENDERS (A51247)
PAIR DIAMOND PLATE...
UNUSED WOLVERINE U-12-78W 78" LAND LEVELER (A51248)
UNUSED WOLVERINE...
2012 Ford F-350 Mechanics Service Truck (A51692)
2012 Ford F-350...
(10) 24' Free Standing Panels (A50123)
(10) 24' Free...
 
Top