5025 loader issue

[pete86a]

Hey guys i posted in hydraulics and not much luck yet. Loader stops halfway up cycle and goes dead until tractor rests and same thing, fire it up and dies after half a cycle. Ive done this several times and only once did it go up and slowly fall down on its own.

So far tracotor has one yr old hydraulic pump, when it went bad last yr power steering quit. I have power steering when bucket quits.

Ive changed hydraulic control box for loader, checked joystick and cables, checked main filter, and fluid level. Havent checked pickup screen as im getting power steering. Any ideas? Had new fluid last yr

Could a check valve in cylinders be messed up?

 

[Tx Jim]

If loader didn't respond with two(2) different control valves I'd be for removing the pressure & return breakaway couplers & male tips and attaching the hoses to tractor with no QD's!!!

 

[Zebrafive]

These tractors have a tandem pumps, two pumps, one for steering, one for implements. It's possible the steering pump failed the first time and now the implement pump failed.

I not saying just replace the implement pump, but I would text/check it.

 

[pete86a]

These tractors have a tandem pumps, two pumps, one for steering, one for implements. It's possible the steering pump failed the first time and now the implement pump failed.

I not saying just replace the implement pump, but I would text/check it.

So the 5025 has a steering pump? Last time hydro pump went i lost loader and steering. Pump that was replaced was on rh side and is the main pump. Thanks again guys

 

[beenthere]

This must be a 5225 model, right?

 

[Tx Jim]

These tractors have a tandem pumps, two pumps, one for steering, one for implements. It's possible the steering pump failed the first time and now the implement pump failed.

I not saying just replace the implement pump, but I would text/check it.

Zebrafive
Please explain how to "TEXT" a hyd pump.:laughing: One's gotta love ".spell check"
Jim

 

[pete86a]

This must be a 5225 model, right?

Yes, im sorry. It is a 5225, im not good with numbers.

 

[Zebrafive]

Zebrafive
Please explain how to "TEXT" a hyd pump.:laughing: One's gotta love ".spell check"


Jim

Oops! It should hve been TEST! the X key is too close to the S key and spell check did not see any error!

 

[Tx Jim]

The devil made me do it!!!!!!:laughing:

 

[Zebrafive]

The devil made me do it!!!!!!:laughing:

I'll always have someone to call me out on my mistakes. Thanks! At least one guy is reading my posts.