!4110 PTO seal

[jpm]

Has anyone replaced their own PTO seal . Mine is starting to leak a little so it may be time

 

[maizeandblue]

Not sure about the 4110 but i just did mine on my 3525 and there was nothing to it. Took 3 bolts out, remove metal retainer, removed rubber seal, removed paper gasket and replaced the gasket, replaced the rubber seal, and put retainer back on. Now i did drain my transmission only because i wasn't sure how much would leak out once all of the above was removed. my gasket actually had a visible tear in it.

 

[UncleBuck01]

Not sure about the 4110 but i just did mine on my 3525 and there was nothing to it. Took 3 bolts out, remove metal retainer, removed rubber seal, removed paper gasket and replaced the gasket, replaced the rubber seal, and put retainer back on. Now i did drain my transmission only because i wasn't sure how much would leak out once all of the above was removed. my gasket actually had a visible tear in it.

Just did mine last month. Son did the work while I supervise, Don't remember 3 bolts just 2 (getting old!) Everything else roughly the same

 

[jpm]

Thanks , mine has two bolts now I just have to do it

 

[Texan4Life]

i posted how i did the seal on my 2810 which should be the same as ur 4110.

https://www.tractorbynet.com/forums/mahindra-owning-operating/228415-pics-2810-pto-seal-how.html

I noticed the pic links were all dead so i uploaded them again