4 wheel drive assist lubing

   / 4 wheel drive assist lubing #1  

IH3444

Veteran Member
Joined
Jan 10, 2004
Messages
2,115
I was also reading the manual about lubing the 4wd assist driveshaft. It states in the manual this should be done every 50 hours. It doesn't go on the describe where to lube, what needs to be lubed.....Is it the drive splines?:confused:
 
   / 4 wheel drive assist lubing #2  
I believe most of the 4wd TCs have a zerk right behind the front axle, immediately in front of where the driveshaft connects.
 
   / 4 wheel drive assist lubing #3  
I have two on the axle pivot point, and one on the shaft.
 
   / 4 wheel drive assist lubing
  • Thread Starter
#4  
Thanks, I knew about the axle pivot point......but was wondering if I should remove the shields and apply oil lube to the splines. I have seen in the past splines which ran dry and destroyed themselfs.......:eek:
 

Tractor & Equipment Auctions

2017 Taylor-Dunn B0-248-36 Electric Utility Cart (A50324)
2017 Taylor-Dunn...
2016 Big Tex 24ft. T/A Flatbed Trailer (A50322)
2016 Big Tex 24ft...
2005 IH 7600 t/a Dump Truck (A52384)
2005 IH 7600 t/a...
UNUSED TOPCAT SSSCR72-72" HYD SOIL CONDITIONER (A51248)
UNUSED TOPCAT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2025 INDUSTRIAS AMERICA 7014 70"X14' HYD DUMP TRL (A51247)
2025 INDUSTRIAS...
 
Top