4 n1 Multipurpose Buckets Info

[Anonymous Poster]

4n1 multipurpose buckets.. on all the Kubota loaders for B2710s-B20s and up.

Excellent performance reports over many many years.
Delivered prices range from $1300 to $4100 depending on size, attachments and services provided before installation and/or shipping.
They are a ship-direct item with us and may be shipped in two forms.
1."materials kit form"
2. having been pre-installed and tested .. then removed as "completed kit with hoses - fittings etc. to aid and lessen time and cost for your installment issues. "

The easy on/off toothbars and slip over cutting edges, welded-on chain hooks may be added as well.

The 4n1 bucket weighs more than standard buckets, so (to be safe) you'll need a counterweight on the rear of your tractor for best and safe performance.

Information and photos are at the links listed below.
Thanks and best wishes,
Steve
Email :Steve@carverequipment.com

4 n 1 buckets in action
http://www.carverequipment.com/images/4n1buc2.jpg
Slip over cutting edge
http://www.carverequipment.com/images/slipover_cutting_edge.JPG
Toothbar
http://www.carverequipment.com/images/toothbar.jpg

Info
http://www.carverequipment.com/4n1_multipurpose_bucket.htm
http://www.carverequipment.com/tooth_bars.htm

 

[ddl]

It is starting to happen. How long before this newsgroup is nothing but free ads

 

[cowboydoc]

ddl,
Same thing happened on the ford diesel website. Great site but what happened there is that dealers were acting as consumers and posting messages as consumers! Then dealers were getting on there. It was a mess for awhile and I quit going there because you didn't know what was true or not true. Jason, the guy that runs the site, banned all ads and statements in the discussion forums from dealers. There were good ones there like R&B but there were alot of bad one there too that all they did was badmouth the other guy, etc.
Richard

 

[dullpain]

Sure Carver is trying to drum up some business. I for one am glad to see the info on 4 n 1's from what I consider a good source. I can't afford one now - don't know if I'll put one on in the future or not - limited use for me but nice to know about. I have seen many, many on this board inquire about 4 n 1's.

I have never bought from Carver but he has had many complimentary references from many on this board I trust. I too hope the dealers don't flood this site but I believe Carver is just trying to help out those seeking the 4 n 1.

If it gets to where I can't tell the good from bad surely Muhammad will kill em all. Like maybe a "DEALER ONLY" place to post and the Dealer must be registered, along with some other guidelines?? BAD Dealer shows up kick him out.

I don't know - I'm just trying to have some tractorin fun here!!!!!

 

[Bird]

Yeah, Larry, I can kind of see the other guys' point and guess it could get out of hand, but the few dealers we've had participate have provided information that I think a lot of us wanted, so I sure don't have any complaints about anything Steve or Rick have done, and in fact appreciate their help.

Bird

 

[Harv]

I gotta agree with Bird on this one.

Rick and Steve have gone out of their way to share useful information with us both on and off the board. I'm sure most of the membership consider both of them friends of the forum.

As it turns out, their expertise stems from the fact that are running businesses which deal with the exact kind of hardware we are all interested in. If all they ever did was throw ads in our faces I might feel differently, but both have come forward pretty much by invitation or in response to a currently running issue. I personally like to hear from the professional experts, and I even find myself being interested in their tractor-related businesses.

I have confidence that Muhammad keeps tabs on the contents of such posts, and would take the appropriate action if it starts getting out of hand.

I'd hate to lose all of our Amsoil reps out there. /w3tcompact/icons/wink.gif

 

[gordon]

Ditto that Bird. But I've got one more thing to add. Both R&B and Carver have ads on this board as well. So I think that more than gives them the right to post here. They post under their own names and don't bad mouth any other companies. Both are very customer driven---my kind of company.

Thanks for the 4-1 link.

Gordon

 

[MarkV]

I'm with you Bird! I am happy to see Steve and Rick share their information with me. I have ask about 4-1 buckets with local dealers and gotten little information. I guess the local dealers are not selling them, so they don't have the information and experience I want. Steve's post tells me I could buy a package, from an experienced source, that was tested for my tractor, that I could install. I can't find that here, so I found it to be useful information for me. That is why I follow the forum. Thanks Steve.

MarkV

PS. Steve, do you have a package for a top and tilt on a B21?

 

[cowboydoc]

Harv,
You are right about Carver and R&B, those obviously are good guys doing a good and ethical business. You haven't been hit here with the unethical guys and I really hope it doesn't happen here.

 

[richh]

BIG DITTO GUYS both of them have done us all a great service.
Rich

 

[caddison]

Hi Guys,

Well even though I am not an orange guy, <font color=blue>blue</font color=blue> guy /w3tcompact/icons/smile.gif, I have picked up a wealth of information from this forum as well as the compact tractor board. I do a lot more watching than posting. I think that as long as a dealer is providing the kind of information that people on the board are looking for it is more of a help than a hindrance. Shoot, until I started following these boards I thought the only 4-in-1 you could get was on a track loader. Man would I love to have one, don't think the 1320 would handle it all that well though. I agree that blatant disregard to the viewers with a bunch of un-solicited ads would be a no no. Where else is so much information so readily accessible. Great forum!-----Cliff

 

[Muhammad]

<font color=blue>How long before this newsgroup is nothing but free ads</font color=blue>

Well we've been at it for three years now, and I don't think you'll find one user out of hundreds of thousands that would say that at any time since we opened the first discussion forum that this was a place with "nothing but free ads".

We don't allow ads to be posted without permission, and we have removed such ads when they were posted in the past. However, there are people/companies with permission to post ads here and Carver Equipment is one. Long before they advertised on our forum, we allowed them to post ads. At one time a user complained about "free ads" being posted... Steve Carver e-mailed me requesting that I delete all previous posts of his, and that he would no longer post since a user was complaining. Without asking, the response from the users was overwhelming in favor of Carver Equipment, and since we have continued to support their contributions to the forum and to educating new tractor buyers. I think you see that exact same pattern here in this thread, with support for Carver Equipment, and hopefully like the last time, Carver Equipment will continue contributing.

This is anything but the type of free ads many forums get overwhelmed with when they become popular.

 

[Billc]

I'm joining the marching band behind Bird. I've been coming to this board for about a year and a half. Back when I started, Steve had time to give a lot more advice. I appreciated it every time. When it came time to buy a tractor I called him for a quote. He gave me a really good quote and answered a lot of my really stupid questions...bet his eyes are still rolling around in his head. Like many others I bought my tractor from a local dealer. None the less I will always be very appreciative of Mr. Carver.

One other thing, Steve Carver pays to advertise on this board. Because of people like him we are able to have this board and it doesn't cost us a dime. Thanks Mr. Carver.

Bill Cook

 

[MChalkley]

Ok, after being away for a few days, all I get to say is "Ditto" to Bird, Muhammad, BillC, etc. None of the folks who sell products on this board has ever been anything but helpful, as far as I'm concerned. Aside from the financial support that makes this board possible, they have always contributed when they had something constructive to contribute. I don't know think anyone could fairly describe any of their posts as blatant commercialism. Steve has proven himself over the years to be a tremendous asset to the consumer, and so has Rick at R&B, for that matter. Thanks, guys. And thanks, Muhammad, for the excellent balance maintained on this board.

MarkC

 

[Bird]

Glad to see you're back, Mark. I've been wondering where you were.

Bird

 

[fishman]

Ditto to all the positive comments in this thread. If someone doesn't like the post, they should ignore it and read something they find useful, of which there is an abundance on TBN.

 

[RICK R]

Thanks to Steve and Rick(R&B)I have learned alot.I hope to be able to buy something(s) from both at some point in time.Let them post as often as they like.

 

[gerard]

Ditto the dittos. Lets not create a problem that may never occur. I think everyone on this board is well informed enough that if erroneous information ever came across from a less than scrupulous dealer the "board" would make quick work of them and send them packing!! All I've seen from people with a commercial motivation have been objective replies to solicited inquiries. Thats the whole basis for this board. The fact that someone may personally benefit shouldn't automatically disqualify him/her from posting a reply. Steve/Rick - keep it up - here's one that welcomes the information and the more the merrier!!