3rd SVC & Harley Rake

[Dicky]

Hi All,

I was able to borrow a Harley Rake from a friend. I has a standard 1/2" quick connect male coupler. I figured I could go down to my local Northern Hydralics & get a 3/8 quick coonect and an adaptor for the hose on the Harley Rake. Low & behold the JD SVC female quick connect is Metric. Does anyone know where to get metric to standard fittings? I could do it 2 ways: either replace my SVC female coupler with a standard one in which case I would need a metric to standard adaptor for the lines coming from the pump (I assume the solid lines plumbed from the pump have metric threads as well) Or get an adaptor for the hose to use my existing SVC female quick connect. Anyone "in the know"?

01 JD 4300

Thanks

 

[beenthere]

Several ways to skin that cat. Whichever seems most logical to you. Will depend on how often you will "borrow" this attachment.
Could thread a new Deere connector to the Harley hoses, then you would have it as a spare when done. Probably how I would do it.