3pt to loader attachment JD4100

[Sasquatch4100]

Just finished 99% of the fab work for the attachment. Got lots of pictures but I'd thought I'd start with a teaser. HAha:laughing:

I needed a fork attachment for my FEL, but didn't like the prices. Decided to make an attachment I could use my 3pt fork attachment and move or use the others I have off the front for getting into tight places with more finesse. I added some hooks and a 2" receiver for moving around trailers and mounting a winch. My 410 loader has a removable bucket and a quick attach system, but JD wanted 1400 plus for a blank attachment plate. So DIY time!

I'll start posting some pics of the project soon.

 

[the6shooter]

I sure like you idea, good thinking

 

[Sasquatch4100]

Here's some mock up pics.

I used a pipe to get the curve of the mount I needed then reinforced it with 1/4 inch by 1.5 inch stock. I used rectangular tubing from an old Walmart warehouse carousel I purchased at a local scrap place. John deere has a convenient attach system, just a shame they want so much for it.

 

[Sasquatch4100]

I have to thank Wirenut for the idea about the sliding bottom mounts for the 3pt. I was originally going to buy a quick attach at harbor freight and just weld it on, but after I saw how he did his I thought I'd save the money. I put the receiver on to be able to move my small trailer around to a nicer out of the way spot. Although I have a good amount of property there's not a good turn around so it makes parking the trailer a little difficult. I'll be making the turn around sometime soon. I just got to moving around the 20+ yards of gravel I had dumped last month. I'll get to cleaning it up a little and maybe adding a few chain attachment points to it then paint it.

 

[Sasquatch4100]

Was grinding off the paint on the scrap steel I used and came across a "Made in USA" stamping. Awesome! Nice to see that for a change.:thumbsup:

 

[J_J]

I have to thank Wirenut for the idea about the sliding bottom mounts for the 3pt. I was originally going to buy a quick attach at harbor freight and just weld it on, but after I saw how he did his I thought I'd save the money. I put the receiver on to be able to move my small trailer around to a nicer out of the way spot. Although I have a good amount of property there's not a good turn around so it makes parking the trailer a little difficult. I'll be making the turn around sometime soon. I just got to moving around the 20+ yards of gravel I had dumped last month. I'll get to cleaning it up a little and maybe adding a few chain attachment points to it then paint it.

Nice mod. If you want to take it a bit further, these fork grapples may add to the versatility of the forks.

 

[Sasquatch4100]

That looks awesome. I've seen those on forklifts used for sheets of light material and tobacco sheets. Unfortunately I think if I add any more weight to the attachment it won't be able to pick up a bag of dog food! haha According to my factory manual I think my lifting cap is only 700lbs, a tad less actually. I would've thought at least close to 1k, but eh. Got to work with what i got. Been happy with it so far and it can get into tight places around the house move dirt around that I wouldn't have been able to to with a larger one.

 

[elginfarm]

Where did you get the ears with the swivels for the three-point pins?

 

[Sasquatch4100]

SpeeCo Inc. - Log Splitter, Tractor Parts, OEM and Farm Accessory Contact information These are what I bought.

I got mine at a place called Wilco, but are also sold at Coastal Farm out here in Oregon. They were about 16 bucks.

 

[Martian]

Really a good idea. Never thought of that but now I think I may have a new project!

 

[bigten65]

looking to build a front loader for my allis chalmers 1965 bigten

 

[bigten65]

looking to build a front end loader for my allis chalmers 1965 Bigten. I just joined and this is my first post.

 

[Sasquatch4100]

Sounds like a good project. You should re post it in the Build it yourself forum. People won't know about it if you keep it here. Good luck!

 

[bigten65]

Thanks I will try Build it yourself forum.

 

[Sasquatch4100]

Although I have a large shop, it's far from warm, and it's been to cold to paint. What's a guy to do? Move it into the living room! One more coat and a JD sticker and she'll be done! Woho! On to the next project!

 

[Sasquatch4100]

All done! Was using it today and decided to snap a few pics. Even got a model to pose with it. :laughing:

 

[Martian]

All done! Was using it today and decided to snap a few pics. Even got a model to pose with it. :laughing:

Looks real nice! Wish I had the time to make one:thumbsup:

 

[JB4310]

Nice looking fab work.
But wouldn't the receiver interfere with certain 3 pt implements ?

JB

 

[Sasquatch4100]

Thanks!

The receiver shouldn't interfere since I don't plan on using it at the same time or having a hitch installed when I'm using other implements.

The retriever on the other hand interferes with everything no matter what you're doing.:laughing:

 

[Johndeere3720]

Very nicely done! If you want down pressure with your box blade just stick it on the front and you can really dig in. :thumbsup: