3510 Tie rod end replacement

/ 3510 Tie rod end replacement #1  

mike0000

Platinum Member
Joined
Jun 4, 2018
Messages
674
Location
Southern Indiana
Tractor
Kubota RTV 900, Kubota L3901, Kymron YH 14 mini ex
looking for a part number/supplier for a Branson 3510 Tie rod end, the threaded end snapped off of my left hand side. I can tell the right side has some play in it, I’d like to replace them both.

Thanks,
Mike

57C43EBC-1A9D-430F-8801-F78C5123C314.jpeg
 
/ 3510 Tie rod end replacement #2  
Mike here is a link where you can find the parts book for the 10 series.

It shows a upgrade kit but it looks like the same one for the original 20 series. If so, did you ever do the upgrade?

I will do more looking and comparing.

 
/ 3510 Tie rod end replacement #3  
I wonder how different it is from the original 20 series tractor. I have a old left hand tie rod that is not to bad of shape. The old right hand one I have is junk. If you think it will work you are welcome to it.
 
/ 3510 Tie rod end replacement
  • Thread Starter
#4  
Thank you K5lwq,
I was aware of an upgrade, I have not upgraded though.
I did do a cheat, several years ago, I added a washer under the nut, which removed most of the slop for a while anyway.
I really need both sides, Thanks for the link.
I may take the ball joint to some auto parts suppliers, if I could get the correct taper, I may be able to do a bit of cut and weld…
 
/ 3510 Tie rod end replacement
  • Thread Starter
#5  
Temporary fix, at least it got the tractor back to my property.


2ADC424B-20D1-4A31-8EBF-92E79D295B71.jpeg
 
/ 3510 Tie rod end replacement #6  
Got to do whatever it takes sometimes. Looks like a good temporary fix. (y)
 
/ 3510 Tie rod end replacement
  • Thread Starter
#7  
Thanks guys,

I really want to move up to a 240v mig one day, currently I make due with a Lincoln gas mig 110v.
Yep, “what ever it takes sometimes“, Did allow me to get the tractor out of my brothers driveway, where the tie rod snapped on him.
 
/ 3510 Tie rod end replacement
  • Thread Starter
#8  
Well, the original tie rods are not available, the upgrade kit costs $700 with tax and shipping. Unbelievable, that will put me over $2k in recent repairs.
 
/ 3510 Tie rod end replacement #9  
Yes, not cheap by any imagination. The thing that happened to me was they kept sending me left side knuckle arms and no right side. So I paid the $700 and yet to receive a right knuckle arm. I had my old one machined to accept the new tie rod. I am told they will send the right side when they get it in but I doubt they will ever ship it.
 
/ 3510 Tie rod end replacement
  • Thread Starter
#10  
Ugg, hate to hear that K5lwq (for both of us), I bit the bullet and order the upgrade kit. I hope it’s not like the HYD pump gear I ordered that took quite a while to get, or a mismatched kit like you received.

Mike
 
/ 3510 Tie rod end replacement #11  
Me too brother. Maybe they will send you two right side knuckle arms that way I have you covered with the left. :ROFLMAO:
 
/ 3510 Tie rod end replacement
  • Thread Starter
#12  
With our luck, I’ll probably get two lefts too🤢
 
/ 3510 Tie rod end replacement
  • Thread Starter
#13  
Parts arrived today, all was correct, pretty easy install, I plan to add a washer between the new knuckle and the castle nut, seems like it should be part of the upgrade kit. Here’s a picture of the components of the upgrade kit and a pic of old vs new tie rod end.

Mike

18E4E302-17C6-4E47-A3EF-D7FDF637EE6D.jpeg57F979A1-38AF-4544-AEF9-6B06A550469F.jpeg
 
/ 3510 Tie rod end replacement #14  
Looks good! I need to call them about the right side I did not receive yet. Sure looks like they must have them in stock. :ROFLMAO:
 
/ 3510 Tie rod end replacement
  • Thread Starter
#15  
Looks good! I need to call them about the right side I did not receive yet. Sure looks like they must have them in stock. :ROFLMAO:
K5lwq, I was surprised they came so quick, I sure hope you get the correct one owed to you! I made sure to open it all up in front of the parts clerk, after your ordeal.

Mike
 

Marketplace Items

2022 Mac Trailers 48ft. T/A Walking Floor Trailer (A61568)
2022 Mac Trailers...
2022 Schulte 2500 Giant Rock Picker (A56436)
2022 Schulte 2500...
New/Unused Landhonor 72in Rock Grapple (A61166)
New/Unused...
New/Unused 72in No Till Seed Drill (A61166)
New/Unused 72in No...
MARATHON 20KW GENERATOR (A58214)
MARATHON 20KW...
2011 DOOSAN G25KW GENERATOR (A58214)
2011 DOOSAN G25KW...
 
Top