3510 Clutch Safety Switch

   / 3510 Clutch Safety Switch #1  

pmk013

New member
Joined
Oct 5, 2004
Messages
5
Location
Molino (Panhandle), FL
Tractor
Mahindra 3510
Mahindra 3510 -- will not start without pumping the clutch while the key is turned on. By reading other threads, I am thinking it may be the clutch safety switch but I am unable to actually find that specific part online. What are you thoughts and is that a difficult part to change? Thanks in advance. PK
 
   / 3510 Clutch Safety Switch
  • Thread Starter
#3  
OK, thank you for the information...I just had the hydraulic system drained and replaced with a new filter. The problem persists. I guess I will take it to a Mahindra tractor repair location for diagnosis and repair. Thanks again. PK
 
   / 3510 Clutch Safety Switch #4  
I didn't try the link to see what you guys are talking about but just from what you posted so far you are headed in the wrong direction. The electro-mechanical clutch is for the PTO only, this tractor has a typical single disc dry clutch for the transmission. Early models such as mine didn't have a safety switch on the clutch anywhere, maybe yours is a late model that does have one. Just follow the linkage from the pedal to the bellhousing to see if a switch is present.
 

Tractor & Equipment Auctions

2020 Toro 6000 Series 60in Zero Turn Commercial Mower (A50322)
2020 Toro 6000...
Fuel Tank (A50121)
Fuel Tank (A50121)
Ingersol Rand 100 Air Compressor (RUNS) (A50774)
Ingersol Rand 100...
2025 12v Diesel Pump, Hose And Nozzle (A50323)
2025 12v Diesel...
2006 Dodge Ram 3500 Pickup (RUNS)(TITLE) (A50774)
2006 Dodge Ram...
(2) Pallets of Implement Parts (A50121)
(2) Pallets of...
 
Top