345 starter solenoid problem

/ 345 starter solenoid problem #1  

vtfrank

New member
Joined
Jun 15, 2002
Messages
5
battery is fully charged. 12.4 volts at solenoid. when key is turned sounds as though gear is jammed-engine does not turn over. any ideas? much thanks frank
 
/ 345 starter solenoid problem #2  
jump the solenoid to the starter with a pos. cable. cable is just a jumper from pos term to starter. make sure its got the brake locked. starter should engage. be careful. if this turns the starter, you have an elec issue between batt and starter. solenoids are know to get corroded. try cleaning terminals with wire brush and make sure you didnt omit any connections. be careful and good luck.
 

Marketplace Items

2006 Generac SD0150 187kVA T/A Towable Diesel Generator (A61572)
2006 Generac...
Chisel Plow (A64127)
Chisel Plow (A64127)
1998 Mack DM690SX Chassis Truck  (A62679)
1998 Mack DM690SX...
2016 Ford F650 Ext Cab Flatbed Truck (A62613)
2016 Ford F650 Ext...
2012 Freightliner M2 106 Altec TA37M 37ft Insulated Material Handling Bucket Truck (A60460)
2012 Freightliner...
New/Unused ATS Welding Machine (A65583)
New/Unused ATS...
 
Top