3032e won't start

[Grandpa423]

Hope someone can give me some suggestions on something I might be missing. I have a 2013 3032e with 30 hours on it. I started it the other day, worked for a short while and shut it off. When I went to start it back up it would not turn over. Tried to jump it off and still response at the starter. I have checked (meter) all of the fuses and relays and they all seem to check out fine. Have checked and double checked all of the safety checks (seat, PTO and N). I have adequate power to the starter, lights work and I can hear the starter relay click when I turn the key over but nothing from there. If anyone has any words of wisdom I would appreciate it.

 

[JD5210]

Tractordata.com shows that the 3032e has a hydrostat transmission. I have seen other posts that people say the problem maybe that pedals are not in a neutral state. You might try moving the pedals and see what happens.

 

[TractorTech]

When you say you can here the starter click, the sound is coming from the solenoid? You direct jump to starter it turns over?
If yes to both questions, it sounds like acid in/on cable clamps at battery or posts. Enough current to get basic functions, but not enough to turn over. Take cables off of battery, clean posts and clamps and check area where clamps are crimped to cable for acid corrosion.