3 point top link

[RedFirstGen]

After owning my tractor for 4 days I just realized the top link for the 3 point hitch is missing. so I need to get one. Not sure what I need...are they all the same or do I need a specific one. And where to get it? I have the 4035. Sorry Im new to this. Thanks

 

[Looking4new]

At one time or another, we were all 'new to this'. Try your Mahindra dealer. I am assuming you bought it new, but even if it is used your Mahindra dealer should have one.

 

[Texan4Life]

tractor supply, agri supply, or other farm type store will have them

 

[oldpilgrim]

Tractor supply stores have them.

 

[RedFirstGen]

Ok. Kind of what I thought. Thanks!

 

[bcp]

Stores may have several lengths of Cat 1 top link, if that is the size you use.

Lift your lower links to about a level position, then measure (with the tape about level) from the top link attachment point on the tractor to a point above the ends of the lower links. That length should be about the middle of the adjustment range of the new link.

Bruce

 

[pmsmechanic]

If you have a spare hydraulic outlet you'll never be sorry that you bought a hydraulic top link. They are fairly reasonable from Surplus Center.

 

[Sysop]

The 4035 comes with a VERY nice top link. I've not seen any at TSC or online anyplace that looked as well made. Call your dealer, it is likely they missed seeing it rolling around the floor of the delivery truck and just didn't give it to you (I had that happen with some of my 3pt parts as the guy they use for all their hauling doesn't haul tractors full time and simply forgot, dealer happily replaced stuff). I think the price on the original is kinda high through Mahindra (I know the lower telescoping links are really spendy). If you need to purchase a replacement, I agree with the above that you would never be sorry about getting a hydraulic top link.

 

[RedFirstGen]

I should have specified. I bought the tractor used. Replies are VERY helpful. Wasn't even aware of the hydraulic option. Thanks!

 

[RedFirstGen]

One follow up question. Any of you have a 4035 and know what length it comes with? I can measure too but figured I'd ask...