3 point log spliter

[Leroy Brown]

I have a CK 20 and am buying a log splitter for it. The question I have is do I have to add a rear remote? Or can I simply use longer hyd. Lines and attach to the quick disconnects that go to my FEL?

 

[Lloyd_E]

It depends. I am no expert but if you have the valves on the splitter I believe you can hook directly into your rear remotes. Essentially you use your tractor as the engine and pump that would normally be on the splitter.

Example:

http://www.princessauto.com/all-sea...ers/8301285-18-ton-3-point-hitch-log-splitter

 

[Leroy Brown]

I don't have the rear remotes. That's why I was wanting to use the already existing hydraulic connections at the FEL.

 

[KennyG]

If you look at older threads, you will find many people use the loader connections. The catch is that you have to find a way to hold the valve open - not so hard if you have individual valve levers (bungee?), a bit harder if you have a "joystick" 4 way control. The additional rear remotes are very convenient if you can afford it.

 

[Dieseljunky38]

Well you could, but it is a pain to have to hook and unhook it when you want to use your loader plus it your loader doesn't have a detent to keep oil flow to your splitter. I would suggest putting on an scv kit. They are a snap to put on and you can always use it for other implements.

 

[Leroy Brown]

Well I truly appreciate all the input. I believe I'll take all your advice and just go ahead and install the rear remote. I think I was expecting to hear that advice to begin with. Thank again to all!

 

[steve0413]

All tractors should have at least one set of rear remotes. Should be a law. :laughing:

 

[MotorSeven]

Dj, is that what those schhhtoopid detents are for?

So if LB did use the FEl hook up with longer hoses a splitter would not work because the remote valve won't give it any fluid?

 

[grnspot110]

I use the bucket cylinder connections on my JD 790. The "power beyond" kit is NLA, I was quoted nearly $1500 to "piece" the kit! I just use a tarp strap to the opposite fender from the joy stick. Works fine for me! ~~ grnspot

 

[LaVoie Equipment]

I use the bucket cylinder connections on my JD 790. The "power beyond" kit is NLA, I was quoted nearly $1500 to "piece" the kit! I just use a tarp strap to the opposite fender from the joy stick. Works fine for me! ~~ grnspot

KIOTI's remotes are MSRP for around $350 plus installation. We install them in about an hour of time. And yes all tractors need at least one remote.

Tony