3 Point lift Bogging Engine YM2000

[treedawg]

I know y'all must be getting tired of my questions.

I swear I'm getting close to debugging this tractor so please bear with me...

When I lift the 3 pt hitch to maximum height it drags down the engine. It does just fine as long as I stop the lift an inch before it reaches maximum height.

Am I missing some type of limiter or is there some way to adjust the lift..??

Lift is strong and works well otherwise.

td

 

[Coda1]

Maybe the feedback rod? Feedback rod adjustment procedure YM2 - Yanmar Tractor Support Message Board

 

[clemsonfor]

Your straining the engine and bumping against the releif and it's letting off pressure to not dead head the pump. Your lift arms or top link are hitting tractor or you piston has topped out. You need to either not pull back all the way or adjust the linkage to not allow it to go that far up.

But it basically is working normal