2520 Hydraulic Top Link

[RobbP]

Anybody out there put a hydraulic top link on their 2520? Did your dealer do it, was it DIY, how much ???

 

[RobbP]

Anybody out there put a hydraulic top link on their 2520? Did your dealer do it, was it DIY, how much ???

 

[RobbP]

Just updating my own post - at this point, it looks like I am the only person interested. I spoke with the JD dealer, and there is no real hydraulic top-link option for the 2520. You could re-route the mid SCV to the top link, and basically give up the ability to control a mid mount mower lift, and there is a room for that, but it would be a custom type job.

 

[RobbP]

Just updating my own post - at this point, it looks like I am the only person interested. I spoke with the JD dealer, and there is no real hydraulic top-link option for the 2520. You could re-route the mid SCV to the top link, and basically give up the ability to control a mid mount mower lift, and there is a room for that, but it would be a custom type job.

 

[TOL1488]

I'm interested as well and will likely use one of the Eaton Cessna valves to control it and the MMM hydraulics.

I'll either wait until someone else figures it out or I have the time to give it a try myself... /forums/images/graemlins/tongue.gif

 

[TOL1488]

I'm interested as well and will likely use one of the Eaton Cessna valves to control it and the MMM hydraulics.

I'll either wait until someone else figures it out or I have the time to give it a try myself... /forums/images/graemlins/tongue.gif

 

[RobbP]

Well I have two problems against me right from the start. a) I have exactly zero experience with hydraulics, and b) I do not have spousal spend authority on the matter.

However, I will find a way to make this happen - maybe not for a while though.

 

[RobbP]

Well I have two problems against me right from the start. a) I have exactly zero experience with hydraulics, and b) I do not have spousal spend authority on the matter.

However, I will find a way to make this happen - maybe not for a while though.

 

[friedlake]

Keep us updated. I would be interested in a hydraulic top link also. I understand then you could have down pressure for the rear implements?? That would be nice!!

Thanks!!

 

[friedlake]

Keep us updated. I would be interested in a hydraulic top link also. I understand then you could have down pressure for the rear implements?? That would be nice!!

Thanks!!