2520 First review. Well i got it Dirty

   / 2520 First review. Well i got it Dirty #1  

Chris2520

Platinum Member
Joined
Mar 26, 2007
Messages
783
Location
Marietta GA.
Well , Today i got it dirty....:D
I go out back and played in the dirt. went down to the bottom. and dug a ditch with the hoe.
as deep as i could go. it was pretty deep. if you was in it. you could not get out...:) I just wanted to get the feel of the hoe. I was very impressed. it was stronger than i figured. I was digging in the hard Georgia red clay. Johnny D just dug right on in.....;) as long as you dont try to get to big of a bite. you can dig about anything. heck i was pulling up rocks red brick. and about 5 feet down. i pulled up a whole cement block. for a min. I thought i was fishing....LOL....:D there is a big field beside the garage. where i hope to do my add on pretty soon. who ever said a fel wont dig , was asleep. as i said its hard packed clay. and you lock johnny D in 4WD and lock the diffs in low range. with the JD tooth bar. and i was peeling it up....:) my buddy has a 863 bobcat we been digging with. i wont say it digs like no BobCat.
but i can almost get as big of a bit as he can. what i was most proud of. his bucket is 60 inch and mine is 61. if he has a full load going down hill. even with his ground weight. the back tires bounce off the ground. I can get just as big a scoop. and as long as the backhoe is on. i feel pretty solid going down hill with a full load.:) the ditch i dug was over 6 foot deep about 8 or 9 feet long. after i was done. i filled it in . it didnt take but a second. to take the fel and fill it up. and smoth it out. i had an old block wall we took down a while back. there was some cemet block 3 rows high about 8 or 9 still mortered togather like one chuck of concreat . i got it in the bucket and picked it up no problem dont know what it weighed. but it did not feel heavy. so far i feel i made the right choice in size for my needs. it has a ton of power. i have been impressed so far with what it can do. I did wash it tonight. but not as extensive as i did the first day. i needed it spit shine for pictures yesterday.....:D the first day is a one time event. backhoe bucket is now seasoned with scratched as is the fel bucket. but i am pleased. Now Johnny D as i have named him. is ready to go to work....:) I think i am going to enjoy it. Now i just got to come up with an idea for some street pads for the hoe , For me and Duc....;)

Chris
 
   / 2520 First review. Well i got it Dirty #2  
Sounds like you had a great day! I had a 4115 set up with loader and hoe which was (is) similar to what you have, they are a great tractor. Enjoy! :)
 
   / 2520 First review. Well i got it Dirty #3  
Chris2520 said:
Well , Today i got it dirty....:D
I go out back and played in the dirt. went down to the bottom. and dug a ditch with the hoe.
as deep as i could go. it was pretty deep. if you was in it. you could not get out...:) I just wanted to get the feel of the hoe. I was very impressed. it was stronger than i figured. I was digging in the hard Georgia red clay. Johnny D just dug right on in.....;) as long as you dont try to get to big of a bite. you can dig about anything. heck i was pulling up rocks red brick. and about 5 feet down. i pulled up a whole cement block. for a min. I thought i was fishing....LOL....:D there is a big field beside the garage. where i hope to do my add on pretty soon. who ever said a fel wont dig , was asleep. as i said its hard packed clay. and you lock johnny D in 4WD and lock the diffs in low range. with the JD tooth bar. and i was peeling it up....:) my buddy has a 863 bobcat we been digging with. i wont say it digs like no BobCat.
but i can almost get as big of a bit as he can. what i was most proud of. his bucket is 60 inch and mine is 61. if he has a full load going down hill. even with his ground weight. the back tires bounce off the ground. I can get just as big a scoop. and as long as the backhoe is on. i feel pretty solid going down hill with a full load.:) the ditch i dug was over 6 foot deep about 8 or 9 feet long. after i was done. i filled it in . it didnt take but a second. to take the fel and fill it up. and smoth it out. i had an old block wall we took down a while back. there was some cemet block 3 rows high about 8 or 9 still mortered togather like one chuck of concreat . i got it in the bucket and picked it up no problem dont know what it weighed. but it did not feel heavy. so far i feel i made the right choice in size for my needs. it has a ton of power. i have been impressed so far with what it can do. I did wash it tonight. but not as extensive as i did the first day. i needed it spit shine for pictures yesterday.....:D the first day is a one time event. backhoe bucket is now seasoned with scratched as is the fel bucket. but i am pleased. Now Johnny D as i have named him. is ready to go to work....:) I think i am going to enjoy it. Now i just got to come up with an idea for some street pads for the hoe , For me and Duc....;)

Chris

Sounds like a good day - had one last weekend 60 leyland cypress had to be planted before the Nor'easter of last weekend. problem was the first 150 ft was loaded with root 4-6 inches or more thick. So I just dug a trench for that length and got the roots the heck outta there. The rest was dig a whole and plant, topsoil fabric and mulch. All done in 1 day with 3 guys. Couldnt happen without the 2520 & 46BH. The trees help up perfect within 50-60 MPH winds without a scratch

As for the pads you will have a long list of customers as soon as you are ready - make some money on your design! allow me to be the first customer !!
 
   / 2520 First review. Well i got it Dirty
  • Thread Starter
#5  
Duc , JD called my man back today. and said none of the other feet will fit our hoe.:( and there all cast. so mods would not be easy. So today i ordered the 448 Street pads. and i am just going to make some big nasty feet my self.....:)

here is the funny thing how JD gets you. i ordered the street pad kit for the 448 to use as my pattern. it is a little over 100 dollars. there are 4 rubber pads. if you by the pads one at a time. there 58 dollars a peace....:eek:
over 200$ for 4 pads. is the crazy or what. if you damaged one. it is still cheeper to just buy a new kit with 4 pads...:)

Chris
 
   / 2520 First review. Well i got it Dirty #6  
Yep, we definitely want pics!
 

Tractor & Equipment Auctions

2016 Ford Explorer AWD SUV (A55758)
2016 Ford Explorer...
2004 CAT 953C Crawler Loader (A47477)
2004 CAT 953C...
KJ 7'x20' Metal Farm Driveway Gate (A53316)
KJ 7'x20' Metal...
Brown Metal Roof Panels (A55758)
Brown Metal Roof...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2021 International HV507 4x4 12ft Single Axle Dump Truck (A54814)
2021 International...
 
Top