2520 and 46 bh

[friedlake]

Great wealth of knowledge on this site. Thank you. Decided to trade in my 4010 for a 2520 just to accomadate a 46bh.4010 is a wonderful machine but I really want a hoe. One ? about the 46 is how deep will it dig. Can't seem to find out particulars about it on the jd website.Keep up the great excahnge of info.

Will try and attach picture of my 4010 after a mid February will line repair. Gosh it was one **** of a cold day!!

Thanks in advance

Jamie

 

[friedlake]

Another picture

 

[TOL1488]

46 BACKHOE FOR 2320/2520

Digging Depth 2 ft. (610 mm) Flat Bottom . . . . . . . . . . . . . . . . .6 ft. 6 in. (2 m)
Swing Arc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 degrees
Loading Height (Bucket at 60 Degrees) . . . . . . . . . . . . . . . . . . .5 ft. 0 in. (1.5 m)
Reach from Center Line of Swing Pivot . . . . . . . . . . . . . . . . . . .8 ft. 5 in. (2.6 m)
Transport Height (Maximum) . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ft. 0 in. (1.5 m)
Bucket Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180 degrees
Loading Reach (Bucket at 60 Degrees) . . . . . . . . . . . . . . . . . . .3 ft. 2 in. (1.0 m)
Transport Overhang . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 ft. 5 in. (1.0 m)
Undercut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 ft. 4 in. (710 mm)
Hydraulic Stabilizer Spread, Down (Approx.) . . . . . . . . . . . . . .6 ft. 6 in. (2.0 m)
Hydraulic Stabilizer Spread, Up (Approx.) . . . . . . . . . . . . . . . . .3 ft. 11 in. (1.2 m)
Boom Lift Ability (Dipper Arm and Boom Extended
Lifting with Boom Cylinder Only, Weight Attached at Bucket Pivot (Measured at 36 in.) . . . . . . . . . . . . . . . . . . . . .348 lb. (158 kg)
SAE Dipperstick Digging Force . . . . . . . . . . . . . . . . . . . . . . . . . .1,250 lb. (5560 N)
SAE Bucket Digging Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2,840 lb. (10 897 N)
Backhoe Control Valve Main Relief Setting . . . . . . . . . . . . . . .2,250 psi (15 514 kPa)

Cut and pasted from Purchasing Guide CD

 

[friedlake]

Well That will due! Thanks ! excatly what I was looking for

Cheers!