2320 tranny heat

[unreconstructed]

Was rinsing off the 2320 after about 1 hour mowing with 62d. Noticed a little steam coming off the tranny area when I wet it. Didn't think about it getting that warm. Any one have any thoughts about this being the norm? Was maybe 40 degrees outside.

 

[kennyd]

It probably runs at about 180* normally...so let it cool before hosing it down.

 

[mfreund]

The 40* temp also causes steam to be visable. If the temp was 80* with the trans at the same temp there would be no steam visable.