2240 Hydraulics Questions

   / 2240 Hydraulics Questions #31  
The valve on the pounder is indeed casted with 550. This is a red valve, their oldest one and they no longer sell parts for it. They did suggest that the manufacturer of the valve may still make or have parts for it, but i didnt pursue that avenue. Im just going to run it with the valve thats on it and close the valve for the remote hydraulics in between posts.

From the casting number it's an open center valve. Since you know the brand of the valve, see if a closed center plug is made for the valve. I doubt it, since they have a different casting number for a closed center valve.
 
   / 2240 Hydraulics Questions
  • Thread Starter
#32  
*FIXED*

I got the problem figured out. It was operator error. When i plugged the pounder in to the hydraulic port on the tractor and pulled the lever on the tractor to actuate the hydraulic port i got fluid into and back out of the pounder. This led me to believe that i had the lever on the tractor in the correct direction. Today, on a whim, i pushed the lever on the tractor in the other direction. Bingo! The pounder lifted and i was golden! Thanks for all the help guys!
 
   / 2240 Hydraulics Questions #33  
Thanks for reporting back.. and :thumbsup: for getting it working for you.
 

Tractor & Equipment Auctions

2005 International 4200 Texoma UC-301 Pier Drilling Truck (A49461)
2005 International...
John Deere 9450 Combine (A50514)
John Deere 9450...
2015 John Deere 35G Mini Excavator (A49461)
2015 John Deere...
2019 JOHN DEERE 317G SKID STEER (A51242)
2019 JOHN DEERE...
2015 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A51222)
2015 FREIGHTLINER...
Delta Consolidated Fuel Tank 48000 (A51039)
Delta Consolidated...
 
Top