2210 steering gear box

[robin824]

I have a YM 2210BD
2TR90
I need a gear box, the one hoye sent is way to small for the sector shift, and the front side closest to the engine has long bolts.

 

[careyo63]

My Parts are showing Steering Sector shaft 2210, 2210B SSS-4310
But I don't show the 2210BD. D=4WD. Fredricks equipment. Is the 4WD shaft different?
SCB-1511 Steering Box. 2210 B,D Or BD is not listed so my guess it's the same?

 

[robin824]

I looked in the hoye book and it said 2wheel and 4wheel were the same. The engine # is 2TR90. Could you send pics of it?

 

[careyo63]

Those part # are from my decades old Yanmar parts book. Not a lot of that model available. Even finding it is questionable. A Pic. Best I can find of it YM2210.

 

[California]

If you have to really dig to find what you need ... the steering box on my previous YM186D had a number cast into the outer housing. Searching that number, I found it was also used on Datsun 240. So Yanmar was using a third-party steering box.

The parts you need to rebuild your steering box might be out there listed for a different application.