I know this has been answered before and I thought I saved the info but I guess I did not. I did a search and came up empty handed. So what is the size wrench for the front lugs for a 2 wheel drive 2210? I promise this time to save it in my tractor file. Thanks.......
Tractor Sizing 2210 front lug wrench size
- Thread starter passgas55
- Start date
- Views: 2335
HoyeTractor
Gold Member, Approved Advertiser
They are a 14mm bolt but I have seen them with a couple of different head sizes. It is normally a 19mm I think but I would take a few sizes up & down from there to be sure.
Aaron
Parts@HoyeTractor.com
(940)592-0181
Aaron
Parts@HoyeTractor.com
(940)592-0181
The head size does vary depending on the bolt supplier. 19mm is most common. Invest $30 in a Harbor Freight socket set ([FONT=arial, sans-serif]ITEM 45467-1VGA) and cover 80% of your needs on that tractor for app. $35.00 One set of wrenches which should include 8, 10, 13, 17, 19mm will cover 90% of your wrenching needs.
[/FONT]
[/FONT]
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 15,027
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
I just checked mine. 22mm, 7/8".
Better take your socket set!
Better take your socket set!
Just got back and I was able to use a 7/8 inch wrench which was a little loose. I moved my tractor from an old milking barn to a lean two. I wanted to remove my wheel from the tractor. All done now, the meth heads have to work a little to steal the tractor.
