2155 blades will not engage

[ss76]

My 2155 model blades will not engage. I am thinking that it is the pull switch, but not sure. I have power to both sides of the clutch and i am thinking that one side should be a ground? Im an auto tech, not a cub cadet tech. Any help on this issue would be greatly appreciated. Thanks in advance. If you have any auto questions, i am more than willing to help out.:confused2:

 

[OldMachinist]

Go to this link and download the service manual for the 2000 series Cub. Cub_Cadet_2000_Series_Service_Repair_Manual.pdf
Section C tells how to test the PTO switch and reverse relay. Also there are electrical schematics after that.

 

[ss76]

Thanks Machinest. Looks like i will do alot af reading this weekend. God Bless.:thumbsup:

 

[WNYTractorTinkerer]

Seen this before.. Frustrationg as heck!! Little black relay box behind the dash or the On/Off switch itself.. Part is about $20.. Good luck!

 

[ss76]

bad reverse relay. the ohm meter never lies. thanks guys, God bless.
best $8.49 ive ever spent.