2022 Outlander Max 6x6

[airbiscuit]

I'm going to purchase some 2" square tubing in the spring and build it right.

I hope you take pics and share with the manufacturer so they can fix the flawed design of their mount.
I hope they gave you a break on the cost for replacement.

 

[ArlyA]

Oh, oh. Spied this while fitting updated push frame.

 

[LittleBittyBigJohn]

When I used to ride big 4 wheelers in the mud, it seemed like CV axles were consumable parts. At that time there were several aftermarket axle manufacturers that made a better axle for less than the stock unit. Seems like Rhino axles was a brand that was popular. You *may be able to get grease back in that and the boot back on. But you might think about getting you a spare to have on hand. They are easy, if time consuming, to replace.

 

[ArlyA]

When I used to ride big 4 wheelers in the mud, it seemed like CV axles were consumable parts. At that time there were several aftermarket axle manufacturers that made a better axle for less than the stock unit. Seems like Rhino axles was a brand that was popular. You *may be able to get grease back in that and the boot back on. But you might think about getting you a spare to have on hand. They are easy, if time consuming, to replace.

Its in the shop now and parts are on order. Will get its spring engine oil change and this repaired for $400 something.

 

[ArlyA]

Photos taken over the past 2 days. Back at work we are.

 

[LittleBittyBigJohn]

How much more winter do you have? It looks like we are done-done with winter here.

 

[ArlyA]

Looks like we got more weather moving in. With snow after the ice on Friday, our good spring weather will continue for a bit longer anyway. If its below freezing overnight, the melt down is real slow.

 

[ArlyA]

Machine got put in the garage yesterday and 80% certain we are done grooming for the year. Need to fix some melted parts.

 

[kenmbz]

Melted ?

 

[ArlyA]

Melted ?

Yes, some plastic parts above the exhaust got real warm the last day of grooming. Was towing real hard while going 8 mph.