2011 DK50 - PTO will not start!!!??? Any suggestions???

[MossflowerWoods]

Hey everyone. I went out this afternoon to grind a few stumps in prep for the concrete driveway and MY PTO will not start. Literally nothing happen when I click the switch.

Any suggestions???

Thanks in advance,

David

 

[oldnslo]

First thing I would check is if there is a fuse in the circuit and or are you getting power to the switch. Next are you getting power to PTO coil.

 

[MossflowerWoods]

First thing I would check is if there is a fuse in the circuit and or are you getting power to switch. Next are you getting power to PTO coil.

Fuse is good I just checked that, the fuse is common with the 4WD and the green light lights for 4WD, si I think maybe there is power.

I do not know where the PTO Coil is... (Sorry I'm still a bit of a n00b...)

David

 

[oldnslo]

Dave,
I can't help on where the PTO valve is on your tractor but would look for valves on the side of the transmission housing. Also no clue on how or if any of safety switches are connected to PTO.

 

[grsthegreat]

There also is a relay that runs the pto. Its a double relay. On my unit it runs pto and brakes

 

[grsthegreat]

On my unit it was located under the steering wheel cowling area. You can go to michiganiron website and look up electrical schematic on your unit.

 

[grsthegreat]

Let me find pics

 

[MossflowerWoods]

There also is a relay that runs the pto. Its a double relay. On my unit it runs pto and windshield wipers

No cab, no windshield, no wipers.

Sorry,

David

 

[grsthegreat]

Sorry. Meant brakes

 

[MossflowerWoods]

Sorry. Meant brakes

THANK YOU!!! I will investigate this!