Ok, I'm looking at a PT. Is there a way to put a 2" ball hitch on one and have it raise and lower with the hydraulics? I have to move a lot of boat trailers and such. It would be great to just swoop in under the hitch and pick up the tongue and drive off. Front mount would be great. rear mount would still be OK.
2" ball hitch
- Thread starter Abitnutz
- Start date
- Views: 1314
KentT
Elite Member
- Joined
- Mar 31, 2005
- Messages
- 2,928
- Location
- Sevierville, TN
- Tractor
- 1993 Power Trac 1430 w/Kubota diesel engine
Abitnutz said:
You can buy this one from the factory, or make your own...
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 58,111
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Abitnutz said:
Just buy an extra quick attach plate and weld a 2" receiver tube to it with some bracing. Then you can add a ball hitch or many other 2" attachements. Search the PT forum for "reciever" and see all the hits you get.
Or, if it is not in your budget, buy the pallet forks, as they are cheap and usefull. Then drill a hole near the end so that you can mount a ball on it when needed.
Barryh
Veteran Member
- Joined
- Jul 5, 2005
- Messages
- 1,588
- Tractor
- Former owner of a P T -180 / Kubota BX-1500 .. A Craftsman Yard Tractor / John Deere 140 H-1 / Cub Cadet 108. And now ( Little Red ) a Power Trac 1425
If you click on the link below and scroll down to the second from the bottom post, you will see one I had made with a spare attachment plate. I'm still making plug in attachments for it, and so far it has worked great.Abitnutz said:
http://www.tractorbynet.com/forums/power-trac/99668-members-home-made-attachments-improvements-7.html
