1st use of 2320

[Jksnvly]

After sitting all winter long, I finally had the opportunity to use my new 2320. I took delivery of 500 3' Norways Spruce to plant at the 'mntn' house. Using a Speeco post hole digger made it fun. I'm amazed at the power these units generate, at not much more than an idle.

 

[thatguy]

thats the setup i needed when i planted some one gallon trees a few weeks back..

I used a set of post hole diggers (manual type) that made digging the holes much easier than using a shovel...

nice looking set up

Brian

 

[Nuru]

Man, does that make me want to go out and get a few more implements!

 

[Chris2520]

Thats a really nice looking set up.
i wonder if a post hole digger would work with an I-Match

Nice tractor. I like Green....

 

[AKfish]

Nice lookin' setup! And those pretty rolling hills ain't hard on the eyes either!!

Chris -- you might figure out a way to burn some steel together and make the PHD fit the IMatch.... but normally, it won't work.

AKfisk

 

[chevy]

Thats a really nice looking set up.
i wonder if a post hole digger would work with an I-Match

Nice tractor. I like Green....

Post hole diggers will not work with any iMatch type quick hitch.

 

[Chris2520]

Nice lookin' setup! And those pretty rolling hills ain't hard on the eyes either!!

Chris -- you might figure out a way to burn some steel together and make the PHD fit the IMatch.... but normally, it won't work.

AKfisk

do you mean just that one. or no post hole digger. like the JD or frontier
will not work with I-Match eather...

 

[aesanders]

do you mean just that one. or no post hole digger. like the JD or frontier
will not work with I-Match eather...

None that I know of will work with an Imatch. You have to take off the top link on all that I have seen.

 

[chevy]

do you mean just that one. or no post hole digger. like the JD or frontier
will not work with I-Match eather...

None that I have ever seen. As aesanders said, you have to remove the top link to hookup post hole digger.

 

[BigD9]

jksnvly, I printed your picture of the 2320 so I can see what my machine will look like when it gets here. Hope you don't mind. 11 more days and counting!