1986 Shibaura (FORD) 2110 Voltage Regulator ?

   / 1986 Shibaura (FORD) 2110 Voltage Regulator ? #11  
In the photo above, the white 6-blade connector is what they send out. Just below (same photo) is the voltage regulator which came on the tractor, and is a 4-blade.
View attachment 883597
Fredricks has the jumper harness to go from 6-balde to 4-blade. I wonder if Len can get that too.

1722896545146.png


There are two types with the 4-blade connector, with or without internal didoes.

1722896687674.png


All of these typically fit all of the know Japan made machines from that era. And many Mazda, Nissan, Datsun, Toyoda, etc too.
 
   / 1986 Shibaura (FORD) 2110 Voltage Regulator ?
  • Thread Starter
#12  
Thank you bmavrick!
I sent len a message, waiting to hear back.
 
   / 1986 Shibaura (FORD) 2110 Voltage Regulator ? #13  
The 6 prong replaces the 4 prong. I can supply the 4 prong
 
   / 1986 Shibaura (FORD) 2110 Voltage Regulator ? #14  
Can also supply the jumper wire.
 

Tractor & Equipment Auctions

2012 TROXELL COMPANY  130 BBL VACUUM TRAILER (A52472)
2012 TROXELL...
John Deere 6430 Side Arm Tractor (A51573)
John Deere 6430...
(10) Replacement Thumb Cylinders (A51573)
(10) Replacement...
2025 New/Unused Wolverine Pallet Fork Frame with Forks (A51573)
2025 New/Unused...
(INOP) NEW HOLLAND L328 WHEELED SKID STEER (A51242)
(INOP) NEW HOLLAND...
2013 Chevrolet Impala Sedan (A51694)
2013 Chevrolet...
 
Top