1986 Belarus 250AS want move.

[lawandorder39]

Hello all, just got tractor out of shop having new clutch and pressure plate installed. I started spreading 18 yds of dirt with Belarus tractor loader. After turning tractor off a spell taking a break I started it back up put in gear and nothing happen in forward or reverse.
Does anyone have and idea of what the problem could be?

 

[Brad_Blazer]

Could the hi-low be in neutral? That's a separate neutral from the regular shift pattern neutral.

 

[lawandorder39]

No it's shift in drive or reverse and still want move. The PTO operates fine also.

 

[banjodunn]

G'day I would talk to the guy's that fitted the clutch and see if they can help


Jon

 

[Brad_Blazer]

No it's shift in drive or reverse and still want move. The PTO operates fine also.

I'm not talking about the forward-reverse shifter. I mean if you move the main shifter all the way forward, you push right for low range, left for high range, and center for neutral. If that gear is in neutral it will not move even if you put the same lever in gear in the lower part of the pattern.

http://youtu.be/4Bgp2CoG-fM

 

[7879fordman]

O god how I don't miss the 250 I had around for a while . Lol way to may levers . Lol


But I would be talking to the guy that done the clutch if it was me .

Sent from my iPhone 5 using TractorByNetlathe

 

[john_bud]

I think brad has it.... gear range is in N

 

[lawandorder39]

Thanks I'll try this. Will let you no results.