16' flatbed w/dovetail price?

[rollbar]

I just ordered a 16' flatbed trailer w/24" dovetail extension. 2 drop down
weight supports in rear-- 3500# tandem axles, brakes on both axles,
82" wide , treated floor -painted, stow away ramps new tires,
5" channel- price $ 1720.00 is this about right? gonna haul a 4520 jd machine. thanks for any input!

 

[MossRoad]

If the trailer has 3500 pound axles, it can haul 7000 pounds, MINUS the weight of the trailer. How much does it weigh?

For instance, I have a similar trailer. It weighs 1500#, so I have a usefull load capacity of 5500#. Subtract your ~4500# tractor and I still have room for 1000# of implement, etc...

 

[MrJimi]

Sounds like a sturdy trailer, is that 14 plus 2 feet or 16 plus 2 feet = 18'

 

[rollbar]

it's a 16' be plus a 2' dovetail- total 18'

 

[rollbar]

excuse my spelling-it's a 16' bed plus the 2' dovetail, total length is 18'

does 1720.00 sound like a fair price?

 

[MrJimi]

Conventional springs or torsion axles? at that price it must be springs
great deal
post some pictures when you get it
something like that around here would go for around $2,500

 

[workinallthetime]

about right on price for new ones. we bought one 5 years agor for 950.00, 16' + 2' dove, twin #3500 axels, wood deck, ramps and brakes on 1 axel. now days i have seen them from 1700 to 2200 for the same trailer.

 

[KeithInSpace]

Just went through extensive trailer shopping. That is a very fair price...a pretty good price, actually.

 

[JDGREEN4ME]

I just ordered a 16' flatbed trailer w/24" dovetail extension. 2 drop down
weight supports in rear-- 3500# tandem axles, brakes on both axles,
82" wide , treated floor -painted, stow away ramps new tires,
5" channel- price $ 1720.00 is this about right? gonna haul a 4520 jd machine. thanks for any input!

I paid around $2400 for a similar size 7K trailer. Mine also had the stow away ramps which I grew to hate over time...probably just me.

 

[RayCo]

Where'd you get this trailer? Wish you had your location in your profile.

 

[RollTideRam]

It would cost more to get 5k axles, but you might want to check into it. It is very easy to overload a 7k trailer. JC

 

[rollbar]

i got this quote from a trailor builder in Paragould Arkansas. Rays's trailor co.
they have been in business for many years . this is the second one I have bought from them.

 

[ampsucker]

just paid $2200 for a 20' version, no dovetail, but it has a diamond plate floor instead of wood planks, a spare tire with rack, and adjustable hitch.

agreed, the trailer weight itself takes a pretty good bite out of the axle load bearing capacity, but i can't pull more with my truck anyway, so it is a good blend of form and function for my particular needs. adding heavier axles adds weight and might tempt you to try to haul more than your truck is rated for.

i got mine from millertime manufacturing in nowata, OK. the only thing i would have changed is have them move the axles up about a foot forward under the frame. i have to load the tractor all the way to the rear to get a good weight balance and i would prefer to be able to pile more implements and other things (mulch, dirt, whatever) up front. they way the axles are now, it kind of limits me unless i counter weight the rear to get a balance. overall, though, a well built trailer.

here's a pic or two. days are heating up around here, starting to long for those cold wintery temps!

amp

 

[wkpoor]

Sounds way too cheap to me. A similar trailer 6 yr ago cost me 2,300.00. Adjusting for the price of steel would probably be closer to 3,000.00 now. I just sold mine. I don't recommend 7000GVW because of the limited hauling capacity. Just because a trailer is rated for more doesn't me you will tow it at that weight. But the extra beef will actually pull easier and will give you a margin of safety. My new one on order is 14K deckover BetterBuilt 20+4. I can't tow 14K but at least what I do put on it will look like its meant to be there. Oh yeh.... the price......6500.00 and some change.

 

[SCOOBY14B]

just paid $2200 for a 20' version, no dovetail, but it has a diamond plate floor instead of wood planks, a spare tire with rack, and adjustable hitch.

agreed, the trailer weight itself takes a pretty good bite out of the axle load bearing capacity, but i can't pull more with my truck anyway, so it is a good blend of form and function for my particular needs. adding heavier axles adds weight and might tempt you to try to haul more than your truck is rated for.

i got mine from millertime manufacturing in nowata, OK. the only thing i would have changed is have them move the axles up about a foot forward under the frame. i have to load the tractor all the way to the rear to get a good weight balance and i would prefer to be able to pile more implements and other things (mulch, dirt, whatever) up front. they way the axles are now, it kind of limits me unless i counter weight the rear to get a balance. overall, though, a well built trailer.

here's a pic or two. days are heating up around here, starting to long for those cold wintery temps!

amp

NICE TRAILER!!! I like the jacks on the back. That'd help a lot if you're loading/unloading a heavy tractor or skid steer and keeping the rear of the truck on the ground on a slope.

What's the axle ratings?

 

[ampsucker]

thanks. they are 7,000 lb axles. (2 x 3500)

i see you and i both have similar tastes in small engine equipment. i, too, have the stihl fs55 weed wacker and the bg55 blower!

amp

 

[Erik_in_Hoyt]

rollbar - sounds like a good deal.
also sounds a lot like the trailer i got from Hedererbuilt in Poplar Bluff, Mo a year ago - only mine included the cost of surge brakes on both axels.

 

[cperky]

I bought an 18' (16+2 dove) with diamond bed , stow away ramps and a break away box about 3 months ago and paid 1850.00 for it. Sounds like you got a pretty good price!