1300 Tiller

[wscott]

The bearings on the Rigth hand side of the tine shaft (opposite of the drive line) went bad, when I remove the tine shaft, I note the bearing housing was broken on the bottom
side, causing the seal to tear. I have tried located a replacement housing without any luck. Does anyone no
of a good source for tiller parts for this model. The number stamped on the housing is E2 and 72.

 

[RandyH]

Fredericks in Hartselle probably has what you need.

Randy

 

[kenmac]

open 1/2 day on sat. I think